Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 24th, 2011, 18:45
Hi,
I have NAS 4 HDD Sata 1 TB
Windows 2008 Server
1. LUN = 60 GB
2. LUN = 1.6 TB
NAS Configuration = RAID Configuration?
Help me, NAS Failed
February 25th, 2011, 12:28
ccamargol wrote:Hi,
I have NAS 4 HDD Sata 1 TB
Windows 2008 Server
1. LUN = 60 GB
2. LUN = 1.6 TB
NAS Configuration = RAID Configuration?
Help me, NAS Failed
Your NAS support only: RAID 0, RAID 1, RAID 5, RAID 10, RAID 50
It could be Raid10.
If it has raid5, config is same like for all HP SmartArray controllers with usual offsets.
February 25th, 2011, 13:04
Start off by removing your drives from this RAID. Clone them then use Winhex to mount them from there. RAID is a difficult recovery and maybe you are better off leaving it to people who do this job all the time
Powered by phpBB © phpBB Group.