plse anybody can help me

i have a seagate following model. its 7200.12

Model : ST3320613AS
Firmware : CC2J
Capacity : 298.09 GB (625 142 448).

###### i can read sectors from some regions in DE. but most of the sectors cannot read. i get following error on terminal

Starting LBA of RW Request=0CD8B2CF Length=FFFFFFFF
ProcessRWError -Read- at LBA 0CD8B2CF Sense Code=43110081
Unrecoverable Error Reported
Starting LBA of RW Request=0CD8B2D0 Length=FFFFFFFF
ProcessRWError -Read- at LBA 0CD8B2D0 Sense Code=C4090082
Unrecoverable Error Reported
Starting LBA of RW Request=0CD8B2D1 Length=FFFFFFFF
ProcessRWError -Read- at LBA 0CD8B2D1 Sense Code=C4090082
Unrecoverable Error Reported.

######if i select command to read " Avtice pc3000 Utility" with no to message " transfer data inspite of error" i can read the sectors.
but its very very slow ie 1sector/second. but not sure abt the integrity of data.

####### i did " recover translator command" . but i get following error

Switching Autoreassign OFF...
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)

G-List erase...

Regenerate translator
Result............................................ : Ok

HDD ID reading...
Detecting defects hiding cmd type...
G-List erase...

Start scanning...
"Fork" searching: 0 - 625142447
Verification error 48-bit (UNC)
Translation "fork" direction detection ambiguity!
Correct it manually!
LBA : 85655454.

#### i added this sector 85655454 to defect list and saved . then run " recover translator" but still i get same error.

any solution? ace supports tried to solve this problem. but the could't . pls help me

with regards
sigmaalv