View topic - In need of replacement PCB for a Western Digital hard drive

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

In need of replacement PCB for a Western Digital hard drive

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

ewarias

Post subject: In need of replacement PCB for a Western Digital hard drive

Posted: October 22nd, 2011, 22:46

Joined: October 22nd, 2011, 22:26
Posts: 1
Location: California

I have a WD1001FALS SATA hard drive that has damaged SATA terminals, I either need to replace the PCB (WD 2061-701622-800-02P) or have someone replace the SATA terminals on my PCB.

Please contact me if you are able to help! Thanks

Top

fzabkar

Post subject: Re: In need of replacement PCB for a Western Digital hard dr

Posted: October 22nd, 2011, 23:05

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

If the SATA power connector is damaged, then you could hard-wire a 4-pin Molex connector to the +12V and +5V pins on the PCB. The +3.3V pins are not used.

http://pinouts.ru/Power/sata-power_pinout.shtml
http://pinouts.ru/Power/BigPower_pinout.shtml

_________________
A backup a day keeps DR away.

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum