ST3320620A

[Nick_CT]

Could anyone give me a starting point on this please? ST3320620A 7200.10, fw: 3.AAF, sn: 5QF3CB22

Detected in PC3K correctly but endless output in terminal of below:

Reset
4096k x 32 DRAM
GALAXY - 1_Disk S-6D 09-22-06_15:48

Buzz HM SFI
!
(P)PATA Reset
Master
AT Er 00 Nwt Er 43 RdWr 1ce8d.03.0180
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 97f29ff7 b6 97f29ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 01ce8d.03.0180

CE Log ErrCode=43 LBA=2466f118 Type=5 Add To Pending 2466f118
$$$SFI
AMR

CorrectWriteStart
AT Er 00 Nwt Er 1b RdWr 1ce8d.03.017f
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 2466ef98 14 2466ef98.2.190 0180 3642 0180 0000
Spare of 2466f117 failed
AT Er 00 Nwt Er 43 RdWr 1ce8d.03.0181
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 01ce8d.03.0181

CE Log ErrCode=43 LBA=2466f119 Type=5 Add To Pending 2466f119
$$$SFI
AMR
AT Er 00 Nwt Er 47 RdWr 1ce8d.03.0182
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=47 at 01ce8d.03.0182

CE Log ErrCode=47 LBA=2466f11a Type=5 Add To Pending 2466f11a
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 1ce8d.03.0183
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 01ce8d.03.0183

CE Log ErrCode=43 LBA=2466f11b Type=5 Add To Pending 2466f11b
$$$SFI
AMR

CorrectWriteStart
AT Er 00 Nwt Er 1b RdWr 1ce8d.03.0184
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 2466f11c 14 2466f11c.2.190 01d0 3642 01d0 0000
Spare of 2466f11c failed

[harddrivespecialist]

You have many pending sectors.

[rameez]

Also could be a head issue because of :

$$$SFI
AMR

[Nick_CT]

I can see the partition and folder structure on the root in data extractor, but it takes about 10mins to come up because it's still busy and in a constant cycle of trying to read that module/s (or whatever it is doing). The fact that the drive inits and I can view folder structure gives me hope.

[einstein9]

I can see the partition and folder structure on the root in data extractor, but it takes about 10mins to come up because it's still busy and in a constant cycle of trying to read that module/s (or whatever it is doing). The fact that the drive inits and I can view folder structure gives me hope.

do u get a lot of software/hardware reset while viewing folders in DE?

[Nick_CT]

do u get a lot of software/hardware reset while viewing folders in DE?

Yes, I do. When I attempt to work with the folders it goes BSY but does eventually after a few minutes, respond. So if I try and expand a folder in DE, it goes BSY, I wait about 5mins, then the folder expands and I can see contents. When I tried to copy a selected folder to an external drive it gave lots of software/hardware resets.

[einstein9]

pm sent

[Nick_CT]

Thanks E9, will give it a go and report back.

[Nick_CT]

Update on this, the problem has been resolved.

It was a firmware issue. Had to use the antipending solution, used a LDR. Am now getting access to data at normal speed and imaging to another drive.

[northwind]

I would like to publicly thank Nick_CT and hddguy for helping me with this, i had a similar problem and has now been resolved.

Cheers!

[Nick_CT]

[Alexii]

i think u can also image these drives in DDI with the option of initialize read on. A bit slow though...