Wanted some feedback on the CPR headcombs for use on a WD1200BB. I believe the headcomb for this model is PC06. There is a ridge on the inside of the drive case that makes removing head 0 with the HDRC combs nearly impossible. Essentially the design of the HDRC tool pushes head 0 down too much and it comes into contact with the ridge on the case. Does the CPR headcomb have a similar problem? There is very little clearance available, so wanted to know if others had a hard time with replacing heads on these drives.

anything on the compatibility list ?

they are pretty good on the email, you could ask them as its an older drive

Andy

_________________
Databusters Data Recovery Glasgow
http://www.datarecovery.co.uk/latest-data-recovery-jobs/

I do not think anybody on this forum had luck with HDRC

_________________
HddSurgery - Professional Data Recovery Tools