Hi, new member here.

I'm working with a Maxtor DiamondMax Plus 9.

This HD won't spin up. Also, isn't recognized by the IDE PCIe adapter.
My questions are:

1. Does the HD have to spin up in order for it to be recognized. In other words, is the information provided by the PCB?

2. if the consensus is, the PCB may be bad, does it have to show some sign of a burn mark? Perhaps a bad chip?

3. Is a replacement PCB the most logical first step.

Thanks,

Randy

1) Yes, HD has to spin up in order to be recognized.
2) Damage could be visible or might not be visible.
3) Yes, PCB would first logical step.

_________________
www.datarecoveryne.com

Hi, welcome.

1. Yes.
2. Not necesserily.
3. Yes, but sometimes you need to transfer ROM from the patient board to the donor. In DM9, it is not always necessary, though.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Ha, snap!

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

I have a replacement PCB coming. I'll post the results.

Randy

If it is a 60 GB / 6y060xxxxxx there can be bad news....

Do you think if it's 6l080xxxx or 6y080xxxx there will be another news ?

What's your question or is it a statement?

_________________
www.datarecoveryne.com

Thsi is the board I ordered:

http://www.hdd-parts.com/18000034.html

Hi,other new member here.
But,6Y120Pxxxx?
HDD isn't recognized in bios.
PCB may be bad,or FW?
If PCB any sugestions.

See my analysis of the PCB:
http://forums.seagate.com/t5/Barracuda- ... d-p/118542

Test points:
http://forums.seagate.com/stx/attachmen ... p_test.JPG

Hi-res scans of both sides of PCB:
http://www.users.on.net/~fzabkar/HDD/Di ... B_comp.JPG (2.1MB)
http://www.users.on.net/~fzabkar/HDD/Di ... GB_bot.JPG (1.6MB)

_________________
A backup a day keeps DR away.

if spin up and doesn't click , check with MHDD , if stay busy forever or id differently than MAXTOR 6P120... your drive is failing and it's game over for DIY. Same if SCAN hangs or you get only X or ! in case it is identified.
PCB is not the problem.

Installed the replacement PCB. It worked. Retrieved all my data.

Randy