MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
positivebit
 Post subject: 7200.11 after spindle replacment
PostPosted: January 2nd, 2012, 9:22 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
** 7200.11 1500GB ** (ST31500341AS)

Received that drive that falled down and motor was seized, so i went into spindle replacment
now the motor spin free, but the drive is not responding, try a head swap and all i got is :

Rst 0x20M

than nothing ( heads still try to do domething but no terminal messages )

by isolation the pcb do NOT give me ctrl+Z ready. ( i try also on another drive same model and also there does not give ctrl+Z ready)
Top
 Profile  
 
northwind
 Post subject: Re: 7200.11 after spindle replacment
PostPosted: January 2nd, 2012, 13:39 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
Maybe alignment issue. How did you free up motor? Does the drive click?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
positivebit
 Post subject: Re: 7200.11 after spindle replacment
PostPosted: January 2nd, 2012, 13:40 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
northwind wrote:
Maybe alignment issue. How did you free up motor? Does the drive click?


i swapped spindle bearing of the motor.
Drive rumble a bit , yes.
Top
 Profile  
 
labtech
 Post subject: Re: 7200.11 after spindle replacment
PostPosted: January 2nd, 2012, 22:24 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Sent pm.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group