Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 7th, 2012, 11:06

Hi, guys, how do you think is the best way for cleaning heads?

Discuss

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 8th, 2012, 6:09

Normally, I clean the heads using clean air, making the air flow betwen heads.
I repeat this process 2 or 3 times.


Discuss

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 8th, 2012, 18:00

what do you use?

Disscuss

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 9th, 2012, 5:03

Hot soapy water.

Discuss

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 9th, 2012, 5:32

Bleach and sandpaper :wink:

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 9th, 2012, 17:59

Wire brush and Dettol

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 9th, 2012, 19:13

Wet head with water

Then apply

If with hair - shampoo
If bald - shampoo or normal soap would do

rub head and rinse with water and you should have a clean head afterwards

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 14th, 2012, 4:35

Hi all, thanks for your clever responses.

Who uses Paper for cleannig heads with alcohol?
Who uses brus to clean at microscope?


Thaks all

Re: HOW IS THE BEST WAY FOR CLEANING HEADS? DISCUSS

February 15th, 2012, 11:37

heard of some ppl using alcohol on paper. Never do that myself , i just change em. Sry.
Post a reply