I have one Seagate ST9250410ASG without the original PCB.
The PCB have External ROM Chip. Any one can send me the ROM from this version:

Family: Momentus 7200.4
Model: ST9250410ASG
FW: 003SDM1
PN: 9PSG42-032
Data code: 10076
Site code: WU
Made in China

If anyone have please tell me, i apreaciate a reply.
Thanks in advance

_________________
Data Recovery Technician - If Data is important don't DIY without knowing the real problem.

It will not work. ROM is 100% adaptive to each individual disk.

You need to get original PCB. Is there any chance client can get it to you?

Really? its complicated, the client before brings the drive to us e went to a computer store and the technicians that analyse the drive doesnt work there anymore. He doesnt now if they change the PCB.
I connected the PCB to PC3000 and with CRT+T, CRT+L saw that the SN of the PCB doesnt match to the original one.
So doesnt exist anymore options?

_________________
Data Recovery Technician - If Data is important don't DIY without knowing the real problem.

CTRL+L at terminal will display SN, if is different when compared to HDD label then original PCB / ROM is needed.

Yes is this case

_________________
Data Recovery Technician - If Data is important don't DIY without knowing the real problem.

there is not a rom image in patient modules in seagate? if yes, you can try to read modules by hot-swap.

yes I also thought that if could be this option. But i have to investigate.
Unless someone knows and i was very grateful if they could share the information.

_________________
Data Recovery Technician - If Data is important don't DIY without knowing the real problem.