All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 29 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Seagate St1000DM000
PostPosted: May 21st, 2016, 8:12 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
13 'beeps' and spins down... heads. Pretty straight forward if there's no media damage for a pro.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: May 21st, 2016, 12:47 
Offline
User avatar

Joined: December 29th, 2011, 2:11
Posts: 190
Location: egypt
stefanocps wrote:
i have same problem with drive
st1000dm003 1Tb
no more recognizable from bios
no strange sound, motor spin regualrly
if connect via serial i receive the same failure

Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame 0480 0000 0000 3240 0008 0000 0000 0000 0EB4 0000 0000 0000 0000
0000 0000 0000 BFFA 8ECB 8800 880D 47CE 012A 11CE EBEE B3F5 53BF 0000 007F 0000
0000 001D 0004 0000


what could i do?
thanks


Short Read Channel then Go to T-Level
this prb may be bad PCB or Bad Head
but if You success To enter T-level With RD Channel
This HDD Will Repair

if you didn't know read channel you can see here
http://www.hpwlab.com/hdd-en/thread-145-1-1.html

_________________
http://www.hpwlab.com


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: May 21st, 2016, 12:52 
Offline
User avatar

Joined: December 29th, 2011, 2:11
Posts: 190
Location: egypt
vijayan wrote:
Rst 0x10M

CommandProcessorTask


Finished SIM Init


Finished InitCmdProcessor


StartDrive


Finished StartDrive


RW: Disc Ctlr Initialization Completed.


StartDrive


Finished StartDrive


ExecuteSpinRequest

ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>/7

F3 7>
FAIL Op=0100 Resp=0007
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
FAIL Op=0100 Resp=0007/
Input_Command_Error

F3 T>
ASCII Diag mode

F3 T>/7

F3 7>x

FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007

Send Status: COMRESET seen
Rst 0x10M

CommandProcessorTask


Finished S

LED:000000CC FAddr:0000F2E5

LED:000000CC FAddr:0000F2E5
Rst 0x10M

CommandProcessorTask


Finished SIM Init


Finished InitCmdProcessor


StartDrive


Finished StartDrive


RW: Disc Ctlr Initialization Completed.


StartDrive


Finished StartDrive


ExecuteSpinRequest

ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>/
FAIL Op=0100 Resp=00072
FAIL Op=0100 Resp=0007
Input_Command_Error

F3 T>
ASCII Diag mode

F3 T>/2

F3 2>
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003Z
FAIL Op=0100 Resp=0007
Input_Command_Error

F3 2>
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
FAIL Op=0100 Resp=0007/
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0007

Send Status: COMRESET seen
Input_Command_Error

F3 T>
ASCII Diag mode

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.135 msecs
F3 2>U


ExecuteSpinRequest

FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
DiagError 00006008
Spin Error
Elapsed Time 1 mins 12 secs
R/W Status 2 R/W Error 84150180
F3 2>


84150180 this Head problem


Error DiagError 00006008 is Spin UP Failed
in your Case this is head Prb

_________________
http://www.hpwlab.com


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: May 28th, 2016, 2:05 
Offline

Banned User

Joined: May 28th, 2016, 1:40
Posts: 48
Location: Viet Nam
kpeddie wrote:
Was imaging this drive slowly through a lot of bad sectors, only really worked in reverse and in PIO mode but was getting there. Drive stopped and started to make beeping noise from voice coil and wouldnt go to ready. Thought it was heads but have disconnected PCB from drive and PCB also wont go ready on its own or with just spindle isolated

Terminal with PCB attached
ExecuteSpinRequest

FAIL Op=0100 Resp=0007
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
No HOST FIS-ReadyStatusFlags 2002B001
Rst 0x20M
Servo Processor Is Reset.


Terminal with PCB not attached

ExecuteSpinRequest

FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
FAIL Op=0100 Resp=0003
No HOST FIS-ReadyStatusFlags 2002B001

In this case 10% PCB
Error 90% as Bad head

_________________
I am from cuudulieuocung.org and I am currently banned from this forum for creating multiple accounts to promote my crappy website.


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: September 9th, 2016, 12:44 
Offline

Joined: August 24th, 2016, 8:53
Posts: 6
Location: Buenos Aires City, BA
so far, i've found this:

http://www.hddoracle.com/viewtopic.php? ... =149#p2436

gonna try it this weekend :wink: , anyone could confirm/give additional advice please?

thanks in advanced...


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: November 22nd, 2016, 13:41 
Offline

Joined: November 22nd, 2016, 13:33
Posts: 3
Location: Poland
Hello,

I have similar problem with my disk Segate Barracuda ST2000DM001 PN: 9YN164-302. I have attached logs from PUTTY. After last line I can not do anything, it freezes. What can I do with that problem?

Any ideas?


Attachments:
dysk.txt [2.31 KiB]
Downloaded 642 times
Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: November 22nd, 2016, 17:13 
Offline

Joined: November 22nd, 2016, 13:33
Posts: 3
Location: Poland
Hello again,

The disk behaves exactly as that one in a short movie
https://www.youtube.com/watch?v=xx6GNejwjn4

I have also ST2000DM001, PN: 9YN164-302.

Best regards,
lskarbek


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: December 7th, 2016, 14:23 
Offline

Joined: November 22nd, 2016, 13:33
Posts: 3
Location: Poland
Any ideas? Nothing comes to my mind.


Top
 Profile  
 
 Post subject: Re: Seagate St1000DM000
PostPosted: December 7th, 2016, 15:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
When you get servo errors, its usually an internal physical problem.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group