All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: ST5000DM000 Firmware sign locked - needs recovery
PostPosted: December 6th, 2016, 23:21 
Offline

Joined: December 2nd, 2016, 14:39
Posts: 8
Location: New york
Can anyone help or point me to someone capable of recovering this drive with crucial data? A company that has successfully recovered a bad head failure for me before and worked on the drive. To begin the drive was dropped 2 ft onto a thin carpet while plugged in but not writing data. Analysis from recovery company in my translation below:

The first donor failed after swapping but became ready on the second donor. After imaging 6gb, the drive could not read anymore so they suspected platter damage + after viewing small particles on the heads under microscope.

They recommended asking someone who is capable of controlling the heads on these and access the data as ACE Lab tools doesn't currently support Crawford drives. ACE Lab has tried assisting remotely with no luck. If anyone could help with this I would greatly appreciate it


Top
 Profile  
 
 Post subject: Re: ST5000DM000 Firmware sign locked - needs recovery
PostPosted: December 7th, 2016, 6:41 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
werner wrote:
Can anyone help or point me to someone capable of recovering this drive with crucial data? A company that has successfully recovered a bad head failure for me before and worked on the drive. To begin the drive was dropped 2 ft onto a thin carpet while plugged in but not writing data. Analysis from recovery company in my translation below:

The first donor failed after swapping but became ready on the second donor. After imaging 6gb, the drive could not read anymore so they suspected platter damage + after viewing small particles on the heads under microscope.

They recommended asking someone who is capable of controlling the heads on these and access the data as ACE Lab tools doesn't currently support Crawford drives. ACE Lab has tried assisting remotely with no luck. If anyone could help with this I would greatly appreciate it


Pepe is your guy . He is capable to deal with this Crawford's

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: ST5000DM000 Firmware sign locked - needs recovery
PostPosted: December 7th, 2016, 10:00 
Offline

Joined: December 2nd, 2016, 14:39
Posts: 8
Location: New york
DR-Kiev wrote:
werner wrote:
Can anyone help or point me to someone capable of recovering this drive with crucial data? A company that has successfully recovered a bad head failure for me before and worked on the drive. To begin the drive was dropped 2 ft onto a thin carpet while plugged in but not writing data. Analysis from recovery company in my translation below:

The first donor failed after swapping but became ready on the second donor. After imaging 6gb, the drive could not read anymore so they suspected platter damage + after viewing small particles on the heads under microscope.

They recommended asking someone who is capable of controlling the heads on these and access the data as ACE Lab tools doesn't currently support Crawford drives. ACE Lab has tried assisting remotely with no luck. If anyone could help with this I would greatly appreciate it


Pepe is your guy . He is capable to deal with this Crawford's


Reached out to him - thanks. If anyone else could possibly help that'd be great


Top
 Profile  
 
 Post subject: Re: ST5000DM000 Firmware sign locked - needs recovery
PostPosted: December 7th, 2016, 14:50 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
DR-Kiev wrote:
werner wrote:
Can anyone help or point me to someone capable of recovering this drive with crucial data? A company that has successfully recovered a bad head failure for me before and worked on the drive. To begin the drive was dropped 2 ft onto a thin carpet while plugged in but not writing data. Analysis from recovery company in my translation below:

The first donor failed after swapping but became ready on the second donor. After imaging 6gb, the drive could not read anymore so they suspected platter damage + after viewing small particles on the heads under microscope.

They recommended asking someone who is capable of controlling the heads on these and access the data as ACE Lab tools doesn't currently support Crawford drives. ACE Lab has tried assisting remotely with no luck. If anyone could help with this I would greatly appreciate it


Pepe is your guy . He is capable to deal with this Crawford's


Absolutely +1 for Pepe

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: ST5000DM000 Firmware sign locked - needs recovery
PostPosted: December 7th, 2016, 21:10 
Offline

Joined: October 5th, 2015, 18:53
Posts: 482
Location: US
I can do those drives.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 163 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group