Guys ,
Does anyone Of you Have a BGA Rework station To work On the following

1 : BGA Controllers On Flash Media
2 : BGA Nand Flash Memory IC
3 : BGA Chip On PCB Like MCU Etc Etc

Love To Hear From You All

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Yes i would think most do

Well,
May i Know What all Can Work For The Stuff i Asked For I Have a Jovy That Never Worked Since Day One and i Was Lazy Enough Not To Get the Main Controller Rectified .I think for Dr work even the cheapest Chinese T-862 Should Be OK I Guess

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Cheap chinese stuff give "uncertain results" (being diplomatic) and you know sometimes you have only 1 shot (not talking about forensics *cough!*).
Definitive solution ? Buy professional equipment instead of $100 or $200 stuff. Then you'll discover that your recoverability success AND work quality will boost if not skyrocket, and also get customers that demand QUALITY instead of PRICE.
Unfortunately such equipment cost in the order of 10/20x the hobbyist stuff.
Think BIG if you want to be BIG

Well,
Some Times Back No One used to think anything higher then weller .Now i have so many friends in the computer repair industry with virtually zero error bga work on USd 2000 ~ 3000 Machines

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

In fact 2000 is not 200. Did you try Metcal by a chance ?

BL ,
The Popular Brands Are Very Hard To Get Here .Same is With Metcal .Jovy RE7500 Seems To Be a Good Solution

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Nope. Express couriers ship everywhere, just order it from local representative. Should be also possible to buy training. Here is no problem, at least. The real issue is the cost , that is not justifiable if the target are low budget low end jobs/customers (this problem is going to short circuit but the discussion would be much more OT).

@ all,
is it me and bl having this discussion only or some of you can join in guys

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

i have been using PDR for a while, very good tool cant fault it, makes easy work for any kind of chip

Everything depend on how many jobs you do a day/week and how much disservice you can tolerate without your tool... Just this.

Damn Good ,
Which Model Is That

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Will be back at work on Tuesday and will pm you

Everything depend on how many jobs you do a day/week and how much disservice you can tolerate without your tool...
i agree with BlackST.

Well,
I disagree 100% on This .Each BGA Rework station takes time to get used to ,All work From the cheapest to the most expensive once .But you have to do your own R&D to make it work .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Then you have too much time at your disposal...

thanks , i will

Okay, well apparently the approvers of posts with links are overwhelmed with requests so I will pose my question without the link to avoid the approval process. Looking into a BGA rework station, has anyone ever used this one SMTmax IR-6000 Dark Infrared BGA Rework Station? Its $1700 which is ok for me but I just need one that is simple to use and I will only use it on hard drive PCB's. Thanks all.

Sorry, but is this even a human being posting this? If it's some kind of translation program, time for a new one!

_________________
Nationwide data recovery services for RAID servers and laptops - http://www.harddriverecovery.org/

I say you'd better show some more respect to people whose native language is other than english.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners