View topic - HDD firmware dead ? Disk spins. PCB have no burns.

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

HDD firmware dead ? Disk spins. PCB have no burns.

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

NJ2012

Post subject: HDD firmware dead ? Disk spins. PCB have no burns.

Posted: July 1st, 2012, 11:30

Joined: July 1st, 2012, 11:28
Posts: 3
Location: Govno

Model: : WD20EARX-00PASB0
PWB: 2060-771698-002 REV A
PCB Sticker: 2061-771698-802 AB

Bios recognize correct model of disk. But all another values is "ZERO".
what can i do ?

Disk spins. PCB have no burns.

Top

pcimage

Post subject: Re: HDD firmware dead ? Disk spins. PCB have no burns.

Posted: July 1st, 2012, 11:45

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Firmware problem.

Not DIY

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

NJ2012

Post subject: Re: HDD firmware dead ? Disk spins. PCB have no burns.

Posted: July 1st, 2012, 12:01

Joined: July 1st, 2012, 11:28
Posts: 3
Location: Govno

pcimage wrote:

Firmware problem.

Not DIY

thanks for the advertising

Top

Vulcan

Post subject: Re: HDD firmware dead ? Disk spins. PCB have no burns.

Posted: July 1st, 2012, 15:37

Joined: May 6th, 2008, 22:53
Posts: 2138
Location: England

You included "HDD firmware dead ?" in your thread title, so I don't see how someone agreeing with you, is "advertising". :shock:

Or is it that you disagree with the comment about firmware problems not being DIY?

I see that you're asking in the Market section for an equivalent drive or PCB, so do you plan to replace the PCB anyway?

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 50 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum