View topic - error LBA 23 using GETDATABACK repaired bricked pcb SEAGATE

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

error LBA 23 using GETDATABACK repaired bricked pcb SEAGATE

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

juanato

Post subject: error LBA 23 using GETDATABACK repaired bricked pcb SEAGATE

Posted: July 4th, 2012, 8:42

Joined: July 4th, 2012, 8:29
Posts: 5
Location: Córdoba, SPAIN

Hello from Spain.

Three months ago, I get bricked a model ST3300418AS. Using the recommended ttl/rs232c solution to put terminal commands made by Seagate via terminal using serial capabilities.... the unit ST3300418AS are updated to cc49 revision of firmware...GETDATA BACK get LBA 23 error accessing the midle of the fisical unit... cannot recover to the end... the version 3.63 of GDB NTFS version... its hang.. may be possible swap the pcb for better recovery?

Top

pcimage

Post subject: Re: error LBA 23 using GETDATABACK repaired bricked pcb SEAG

Posted: July 6th, 2012, 3:54

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

PCB will not help

Sounds like bad sectors

Clone with non-windows tool (e.g. Media Tools Pro, dd_rescue), then run GDB on clone

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum