Photo:

http://fotki.yandex.ru/users/t9118359605/view/467211/

Drive clicks head,. Bios does not detect it. In the terminal, with each sound head writes "HM".
Photo:

http://fotki.yandex.ru/users/t9118359605/view/467215/

This file is the sound of clicks: https://docs.google.com/open?id=0B3p1hWfi6mIlYkNSYzE0ODRoVWc
After about a minute he turned off.
Me to recover the data. Which in this case, the fault most likely?

Heads are bad, stop playing with it.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Thank you, but there are a couple of questions:
About the head - that's your assumption, or an accurate diagnosis?
A simple replacement of heads helps in such cases?

A "accurate" remote diagnosis is impossible remotely

A "simple" head exchange might well solve the problem, but there could (probably is) be underlying issues.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Read this, but don't play anymore with the drive:


As is written, HM means head are damaged.
Good luck.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Heads for sure, maybe platter damage also

_________________
You don't have to backup all of your files, just the ones you want to keep.

The main problem would be to replace the heads, I understood correctly?

Well not problem, but solution.
Be aware, it is not as easy as it looks if the person performing the work is inexperienced with the technique.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Thank you all for your answers.