I have a HDT721016SLA380 hdd. It start good no knocking sound giving DRD & DSC but not showing in utility. I run utility manually and there I read SA, as it have some corruption. I have attached the SA info.

Any help is appreciated.

The follwing is the info readed from the hdd, but no access to it's Mdl No., S/N, Capacity and it's Data.
Any help is appreciated.

Module RSVD............................. : Ok
Module USAG............................. : Ok
Module not read (PSHT)
Error : Device error detected (UNC)
Module not read (PSHT)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module PSHT............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module RDMT............................. : Ok
Module CNSL............................. : Ok
Module RWCN............................. : Ok
Module CHNM............................. : Ok
Module SRVP............................. : Ok
Module SRVM............................. : Ok
Module ALTC............................. : Ok
Module ZONE............................. : Ok
Module PTRT............................. : Ok
Module RAM0............................. : Ok
Module not read (OVR1)
Error : Device error detected (UNC)
Module not read (OVR1)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module OVR1............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module SMRT............................. : Ok
Module MLBA............................. : Ok
Module SECI............................. : Ok
Module SRIF............................. : Ok
Module SERL............................. : Ok
Module IDNT............................. : Ok
Module DCOT............................. : Ok
Module BULK............................. : Ok
Module PTCH............................. : Ok
Module SSPT............................. : Ok
Module not read (##01)
Error : Device error detected (UNC)
Module not read (##01)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module ##01............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module ##02............................. : Ok
Module ##03............................. : Ok
Module ##04............................. : Ok
Module ##05............................. : Ok
Module PESD............................. : Error
Error : Module not read (PESD)
Error : Device error detected (UNC)
Module SRST............................. : Error
Error : Module not read (SRST)
Error : Device error detected (UNC)
Module SSSC............................. : Ok
Module SSCD............................. : Ok
Module NVRC............................. : Ok
Modules reading completed

That's going to be a tough cookie with PSHT (plist) damaged

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Yes but any other way to access data.

How badly are the copies of PSHT damaged?

You may get lucky and find that it's only "00" padding that's unreadable, so you can make a good PSHT module out of the two.

I'll bet the SA is damaged there too, so you'll have to relocate the SA to a different surface.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!