Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 25th, 2013, 22:39
Hello Everyone
After what people think my chances are of getting everything going again.
Server with RAID 1+0
Server stalled. Restarted
Raid rebuilding disk 4, at about 95% it fails.
So i replace disk 4, rebuilds again and again at 95% rebuild fails.
Tried to get a backup gets to about 95% complete and backup fails.
Failing because the raid card detects a stall and resets it's self
Test disk 3 with HDD Sentinal comes back at 2% health. But i didn't look to see why, kicking my self.
Using EAseus Disk Clone to to sector by sector clone of disk 3.
At 81% through found the read errors.
So far at 191.75Gb copied to other HDD, 41.23Gb left and 85 read errors.
Given that the server was still working with the 2% health HDD, what do you think my chances are of the server working with the cloned drive if the clone completes ?
Thanks in-advance for any feed back.
Powered by phpBB © phpBB Group.