seagate momentus 7200.5 ST9750420AS zero LBA

[cherenkov]

Hello
I have a 750gb Seagate Momentus 7200.5, model ID ST9750420AS.
I get> HDD does not support set max LBA
and> Recalibrate error Device error detected "ABR" 51/04 .
drive capacity shows zero MB.
LBA is set everywhere to minus one "-1", cannot be changed.
What should I look out for?
Pavel

[labtech]

Sounds like a firmware issue, but what is the drive's mechanical behavior? Any weird sounds.

[hddguy]

Ctrl + U should dump STUFF.
Post here the answer to Ctrl+U.

What would this achieve?

0 LBA generally occurs when ID is made from ROM (i.e if SA cant read) or if SA has errors (like with bad Translator or non-native ROM). You should post terminal log, check HDD for any mechanical sounds during operation, and check that spindle remains powered after DRDY is reached

[hddguy]

this is valid for pre F3 series only

[hddguy]

Seagate momentus 7200.5 is F3 arch ?

http://media.bestofmicro.com/4/Z/274931 ... B-pers.jpg

[damian]

hello.

I have a similar problem

terminal shows:

Code:

EarlySpinup Enabled                   
Rst 0x10M         
SIM Error 2041               
RW Error         
[PORFAIL:MC.disabled]   

What can I do??

[jignesh]

hello.

I have a similar problem

terminal shows:

Code:

EarlySpinup Enabled                   
Rst 0x10M         
SIM Error 2041               
RW Error         
[PORFAIL:MC.disabled]   

What can I do??

Dear Friend Damian
Its Very Easy I Dont Think U Need To Resoved This Problem For Any Rocket Science.
Experiance And Learning Make Every Case Easy.