Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
May 11th, 2013, 1:38
Hi,
Working with the drive, the drive is Full of RED/GREEN blocks. Usually in WD we do SMART reset & this works fine. But this is same after resetting SMART.
Any advice will be appreciated.
May 11th, 2013, 5:26
Need data or not ?
May 11th, 2013, 5:27
yes, for data recovery.
May 11th, 2013, 14:45
If you get delays only / "some" bads it is a typical case where DDI and maybe DE of PC3000 can help.
OR heads are worn out.
OR the drive was kicked HARD.
Or both.
(I wonder if SA can be completely read and how).
May 11th, 2013, 15:20
yes, SA can be accessed normally, all the modules are fine except DUMP in SA-A
no clicking, no abnormal sound, smooth power. no UNC, only GREEN/RED Blocks. that's why very slow..
Powered by phpBB © phpBB Group.