Barracuda 7200.12 InitiateMarkPendingReallocateRequest

[michael chiklis]

Hello,
i have this Barracuda 7200.12 ST3500418AS with fw CC33, terminal log:

Code:

Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
ASCII Diag mode

F3 T>
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 00000095
InitiateMarkPendingReallocateRequest for disc_lba: 00000096
InitiateMarkPendingReallocateRequest for disc_lba: 00000097
InitiateMarkPendingReallocateRequest for disc_lba: 00000098
InitiateMarkPendingReallocateRequest for disc_lba: 00000099
InitiateMarkPendingReallocateRequest for disc_lba: 0000009A
InitiateMarkPendingReallocateRequest for disc_lba: 0000009B
InitiateMarkPendingReallocateRequest for disc_lba: 0000009C
InitiateMarkPendingReallocateRequest for disc_lba: 0000009D
InitiateMarkPendingReallocateRequest for disc_lba: 0000009E
InitiateMarkPendingReallocateRequest for disc_lba: 0000009F
InitiateMarkPendingReallocateRequest for disc_lba: 000000A0
InitiateMarkPendingReallocateRequest for disc_lba: 000000A1
InitiateMarkPendingReallocateRequest for disc_lba: 000000A2
InitiateMarkPendingReallocateRequest for disc_lba: 000000A3
InitiateMarkPendingReallocateRequest for disc_lba: 000000A4
InitiateMarkPendingReallocateRequest for disc_lba: 000000A5
InitiateMarkPendingReallocateRequest for disc_lba: 000000A6
InitiateMarkPendingReallocateRequest for disc_lba: 000000A7
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 000000A8
InitiateMarkPendingReallocateRequest for disc_lba: 000000A9
InitiateMarkPendingReallocateRequest for disc_lba: 000000AA
InitiateMarkPendingReallocateRequest for disc_lba: 000000AB
InitiateMarkPendingReallocateRequest for disc_lba: 000000AC
InitiateMarkPendingReallocateRequest for disc_lba: 000000AD
InitiateMarkPendingReallocateRequest for disc_lba: 000000AE
InitiateMarkPendingReallocateRequest for disc_lba: 000000AF
InitiateMarkPendingReallocateRequest for disc_lba: 000000B0
InitiateMarkPendingReallocateRequest for disc_lba: 000000B1
InitiateMarkPendingReallocateRequest for disc_lba: 000000B2
InitiateMarkPendingReallocateRequest for disc_lba: 000000B3
InitiateMarkPendingReallocateRequest for disc_lba: 000000B4
InitiateMarkPendingReallocateRequest for disc_lba: 000000B5
InitiateMarkPendingReallocateRequest for disc_lba: 000000B6
InitiateMarkPendingReallocateRequest for disc_lba: 000000B7
InitiateMarkPendingReallocateRequest for disc_lba: 000000B8
InitiateMarkPendingReallocateRequest for disc_lba: 000000B9
InitiateMarkPendingReallocateRequest for disc_lba: 000000BA
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 000000BB
InitiateMarkPendingReallocateRequest for disc_lba: 000000BC
InitiateMarkPendingReallocateRequest for disc_lba: 000000BD
InitiateMarkPendingReallocateRequest for disc_lba: 000000BE
InitiateMarkPendingReallocateRequest for disc_lba: 000000BF
InitiateMarkPendingReallocateRequest for disc_lba: 000000C0
InitiateMarkPendingReallocateRequest for disc_lba: 000000C1
InitiateMarkPendingReallocateRequest for disc_lba: 000000C2
InitiateMarkPendingReallocateRequest for disc_lba: 000000C3
InitiateMarkPendingReallocateRequest for disc_lba: 000000C4
InitiateMarkPendingReallocateRequest for disc_lba: 000000C5
InitiateMarkPendingReallocateRequest for disc_lba: 000000C6
InitiateMarkPendingReallocateRequest for disc_lba: 000000C7
InitiateMarkPendingReallocateRequest for disc_lba: 000000C8
InitiateMarkPendingReallocateRequest for disc_lba: 000000C9
InitiateMarkPendingReallocateRequest for disc_lba: 000000CA
InitiateMarkPendingReallocateRequest for disc_lba: 000000CB
InitiateMarkPendingReallocateRequest for disc_lba: 000000CC
InitiateMarkPendingReallocateRequest for disc_lba: 000000CD
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 000000CE
InitiateMarkPendingReallocateRequest for disc_lba: 000000CF
InitiateMarkPendingReallocateRequest for disc_lba: 000000D0
InitiateMarkPendingReallocateRequest for disc_lba: 000000D1
InitiateMarkPendingReallocateRequest for disc_lba: 000000D2
InitiateMarkPendingReallocateRequest for disc_lba: 000000D3
InitiateMarkPendingReallocateRequest for disc_lba: 000000D4
InitiateMarkPendingReallocateRequest for disc_lba: 000000D5
InitiateMarkPendingReallocateRequest for disc_lba: 000000D6
InitiateMarkPendingReallocateRequest for disc_lba: 000000D7
InitiateMarkPendingReallocateRequest for disc_lba: 000000D8
InitiateMarkPendingReallocateRequest for disc_lba: 000000D9
InitiateMarkPendingReallocateRequest for disc_lba: 000000DA
InitiateMarkPendingReallocateRequest for disc_lba: 000000DB
InitiateMarkPendingReallocateRequest for disc_lba: 000000DC
InitiateMarkPendingReallocateRequest for disc_lba: 000000DD
InitiateMarkPendingReallocateRequest for disc_lba: 000000DE
InitiateMarkPendingReallocateRequest for disc_lba: 000000DF
InitiateMarkPendingReallocateRequest for disc_lba: 000000E0
Rst 0x10M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 000000E1
InitiateMarkPendingReallocateRequest for disc_lba: 000000E2
InitiateMarkPendingReallocateRequest for disc_lba: 000000E3
InitiateMarkPendingReallocateRequest for disc_lba: 000000E4
InitiateMarkPendingReallocateRequest for disc_lba: 000000E5
InitiateMarkPendingReallocateRequest for disc_lba: 000000E6
InitiateMarkPendingReallocateRequest for disc_lba: 000000E7
InitiateMarkPendingReallocateRequest for disc_lba: 000000E8
InitiateMarkPendingReallocateRequest for disc_lba: 000000E9
InitiateMarkPendingReallocateRequest for disc_lba: 000000EA
InitiateMarkPendingReallocateRequest for disc_lba: 000000EB
InitiateMarkPendingReallocateRequest for disc_lba: 000000EC
InitiateMarkPendingReallocateRequest for disc_lba: 000000ED
InitiateMarkPendingReallocateRequest for disc_lba: 000000EE
InitiateMarkPendingReallocateRequest for disc_lba: 000000EF
InitiateMarkPendingReallocateRequest for disc_lba: 000000F0
InitiateMarkPendingReallocateRequest for disc_lba: 000000F1
InitiateMarkPendingReallocateRequest for disc_lba: 000000F2
InitiateMarkPendingReallocateRequest for disc_lba: 000000F3

It stops every 19 LBAs, it continues only if i turn off the power supply and turn on again.
No head clicking.

Can i do something?
Ideas?

[dmarques]

Hi,

Yes, repower and continue

[michael chiklis]

Hi,

Yes, repower and continue

Sarcasm?


I already did dozen of times, how long should i still do this funny game?

[hddguy]

Did you disable relocation parameters yet?

[michael chiklis]

No, how should i disable it?

[dmarques]

Yep, sarcasm!
But I was going to say what hddguy told you.

Anyway, even with repower you can probably get the data you need.

[michael chiklis]

ok, how i should disable relocation parameters?

[hddguy]

ok, how i should disable relocation parameters?

Is it a good idea for you to work on a case like this without knowing how to disable it?

You can find options you need under 'hdd id edit' within utility. If for some reason this does not work there are a couple of other ways to achieve the same result but im sure this method will work.

[dmarques]

You own PC3000 right?
You have also their manual?

[michael chiklis]

I own PC3000 PCI, yes i have some manuals but not for 7200.12 drives.
As i know, PCI version doesn't support F3 drives.

[hddguy]

Then you need to manually address the relocation issues via congen commands at terminal. If you dont know them, then your only option is to continue to power cycle the drive, but with this comes some risk of more damage internally and is an unnecessary risk.

With the huge volume of models that is not supported in PCI version, if you want to offer a professional service to clients you really need to ensure you are current and tools you have are up to date and appropriate. Otherwise, you are putting clients data at risk.

[michael chiklis]

You wrote:

Code:

If for some reason this does not work there are a couple of other ways to achieve the same result

Which are these other ways?

[hddguy]

Then you need to manually address the relocation issues via congen commands at terminal.

Its unlikely that anyone will give these out publicly here. Other 2 methods I know of involve PC3000 UDMA. Maybe its possible with some tool like salvation data, but I dont (wont!) use it so I dont know.