ST2000DM001 Won't Spin Up Terminal Log

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
chicotecni
  • chicotecni
  • Posts: 1
  • Joined: August 1st, 2013, 14:14
  • Location: Brasil

ST2000DM001 Won't Spin Up Terminal Log

August 1st, 2013, 14:33

Hello, i'm new on this forum and i have a ST2000DM001 PN:9YN164-306 FW:CC4H hard disk that does not spin up, i connect it to a serial TTL adapter and get
SMI Init (or) Training Failed
0x000000D2
on terminal, i guess the PCB firmware is corrupted, i will appreciate any idea in this case, thanks for now and sorry for my poor english
mr_spokk
  • mr_spokk
  • Posts: 1592
  • Joined: May 21st, 2007, 16:10
  • Location: Gothenburg/ Sweden

Re: ST2000DM001 Won't Spin Up Terminal Log

August 1st, 2013, 15:20

chicotecni wrote:
SMI Init (or) Training Failed 0x000000D2

It means that you need to exorcize more 8)
Do you have a compatible Pcb to test with?
BlackST
  • BlackST
  • Posts: 7476
  • Joined: July 18th, 2006, 3:05
  • Location: ITALY

Re: ST2000DM001 Won't Spin Up Terminal Log

August 1st, 2013, 16:07

I have a feeling someone else did fiddle with the drive BEFORE , or the entire story was not told 8)

P.S. if original FW was lost, what was let's say 1000$ becomes 10'000 $.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index