Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Seagate Barracuda ST3250820 terminal error

December 17th, 2013, 6:22

Hello,

I try to recover files from ST3250820. I receive following error in terminal. On level 2 drive spin down and up
Attachments
st3250820.jpg

Re: Seagate Barracuda ST3250820 terminal error

December 17th, 2013, 13:31

jerovsek wrote:Hello,

I try to recover files from ST3250820. I receive following error in terminal. On level 2 drive spin down and up



Dear Friend Jerovsek

Ur Problem Is Not Resolved By Just Terminal.
u need minimum Salvationdata,DFL, Tool To Handle This Case.

Your Friend
Jignesh Pankhania

Re: Seagate Barracuda ST3250820 terminal error

December 17th, 2013, 15:07

' $ ' and AMR...

I am afraid It takes something else more than ......that tools.

Even with UDMA alone.

Re: Seagate Barracuda ST3250820 terminal error

December 18th, 2013, 4:52

BlackST wrote:' $ ' and AMR...

I am afraid It takes something else more than ......that tools.

Even with UDMA alone.



Dear Friend BlackST

I Have done many many cases with SD no problem with it sometime this issue is related to head but mostly resolved with head swap.
so why i tell them this case is not for terminal only need basic setup and good knoledge.

your friend
jignesh pankhania

Re: Seagate Barracuda ST3250820 terminal error

December 18th, 2013, 5:26

jignesh wrote:sometime this issue is related to head but mostly resolved with head swap.


With the right tools and knowledge its possible for all heads to read in such situation without changing them

Re: Seagate Barracuda ST3250820 terminal error

December 18th, 2013, 8:50

hddguy wrote:
jignesh wrote:sometime this issue is related to head but mostly resolved with head swap.


With the right tools and knowledge its possible for all heads to read in such situation without changing them


*THUMBS UP*

If there's servo there's hope .

:mrgreen:
Post a reply