Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Fujitsu not detected what is this noise?

May 22nd, 2013, 5:06

Hi,
I have a MHV2060BH 2.5" hdd. It keeps "struggling", emitting the attached sound, then it powers down. What is it doing?
Sorry, if this has been already asked, I checked several hdd sounds, but all of them were related to clicking, but this seems something else.
Attachments
fujitsu.zip
(799.87 KiB) Downloaded 325 times

Re: Fujitsu not detected what is this noise?

May 22nd, 2013, 8:11

This is a stiction problem, at the very least. You really need to find a lab who will help you out. There is a good chance that your laptop got bumped while the drive was spinning. So, it is likely that there may be some head and media damage to deal with, as well.

Re: Fujitsu not detected what is this noise?

January 27th, 2014, 8:23

Fortunately no lab had to be involved.
Used "percussive maintenance" and drive is up and running. Thanks for info, whoever shared it.

Re: Fujitsu not detected what is this noise?

January 27th, 2014, 10:48

Just make sure to backup whatever data you have on there. If bashing it actually worked, you've almost certainly damaged the heads and some of the platter surface. The drive will fail sooner or later. It's just a matter of when at this point.
Post a reply