Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 14th, 2014, 1:05
Model : ST500LM000-1EJ162
Firmware : DEM6
On Power the drive sounds like it comes ready.
Terminal works, can do all the user commands.
LIKE N1, V4, V10, A LIST CLEAR all work fine
Translator regen gives following error " LED:000000BC FAddr:00007470 "
On Attempt to read sectors drive gets BUSY
On power up terminal says:
Rst 0x40M
Servo Processor Is Reset.
(P) SATA Reset
SIM Error 2041 LBA 0000000000090AAD FD FC358028
RW Error 00000080
ABORT!
OpCode = 00000000
SenseCode = 03310000
ReadyStatusFlags = 0002A1A1
ABORT!
OpCode = 00000000
SenseCode = 03310000
ReadyStatusFlags = 0002A1A1
Any solution Please
Thanks
Powered by phpBB © phpBB Group.