View topic - Need loader for WD10TMVW

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Need loader for WD10TMVW - 11ZSMS5

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

deftrue

Post subject: Need loader for WD10TMVW - 11ZSMS5

Posted: April 23rd, 2014, 11:35

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Hello,

I'd appreciate someone could share a loader for this WD, FW: 00650006.

Thanks in advance.

Top

pcimage

Post subject: Re: Need loader for WD10TMVW - 11ZSMS5

Posted: April 23rd, 2014, 11:46

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 6
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1372
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 65.09J
>ROM generation.......................... : 65.09J
>Link table version...................... : 05.0M.
>Consolidated ROM version................ : 00650009
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Modules directory address............... : FIXED
>SA regions address...................... : by default
>
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 6
>Heads number in use..................... : 6
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3,4,5
>ROM Firmware version.................... : 00650006
>
>Service area:
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>
>Configuration reading................... : Ok
>Master Password......................... : has not been set
>User Password........................... : has not been set

Attachments:

11.rar [203.63 KiB]
Downloaded 226 times

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

deftrue

Post subject: Re: Need loader for WD10TMVW - 11ZSMS5

Posted: April 23rd, 2014, 12:23

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Ach. Not lucky with that one - it is not uploading as perm overlay. My ROM actually reports the following:

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 65.06J
ROM generation.......................... : 65.06J
Link table version...................... : 05.0L.
Consolidated ROM version................ : 00650006

ROM Modules:
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5
ROM Firmware version.................... : 00650006

Thank you for your loader, though.

Top

pcimage

Post subject: Re: Need loader for WD10TMVW - 11ZSMS5

Posted: April 23rd, 2014, 13:42

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

I'll have another look tomorrow.

If you haven't heard from me by lunchtime, then drop me a PM, I will have forgotten!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

pcimage

Post subject: Re: Need loader for WD10TMVW - 11ZSMS5

Posted: April 28th, 2014, 4:00

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Try this...

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 6
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1372
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 65.06J
>ROM generation.......................... : 65.06J
>Link table version...................... : 05.0L.
>Consolidated ROM version................ : 00650006
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Modules directory address............... : FIXED
>SA regions address...................... : by default
>
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 6
>Heads number in use..................... : 6
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3,4,5
>ROM Firmware version.................... : 00650004
>
>Service area:
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1

Attachments:

11.rar [202.24 KiB]
Downloaded 225 times

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

deftrue

Post subject: Re: Need loader for WD10TMVW - 11ZSMS5

Posted: April 29th, 2014, 12:01

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

That one made it!

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum