I can read from the disk until arround 39.000.000 sectors. After that, nothing. I cleaned the smart, no resident G-List, Translator regeneracion, the modules are ok. Had anyone the same problem? Earlier i had the same problem with a Hitachi disk 3.5" that i caoult read until 20Gb.

What was the original problem?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Is the P-list ok ? Does it have entries ?

You did answer it your self

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Sorry for my late reply, i did solve the problem. The P-list wasn´t ok even dow it gave me ok. I could´n modify the modules until i made a regen translator without P-list. After i cleaned the G-list, repaired the P-list and once again made a translator regen with P-list this time...i hade access to the sectors.

Strange disk jijiji
Thanks for your replays and sorry again for beeing late

Thanks for returning to the thread and sharing the solution.

Hi nightelf1980,


What tool did you use ?

I used a Pc3000