All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: p410i G6 Raid Configuration
PostPosted: August 29th, 2014, 10:29 
Offline

Joined: February 24th, 2011, 9:27
Posts: 88
Location: East Coast
Anyone know/willing to share the raid parameters for a p410i g6 raid 5?

Will definitely return the favor if able. :)


Top
 Profile  
 
 Post subject: HP p410i G6 Raid recovery
PostPosted: August 29th, 2014, 23:43 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
Jar wrote:
the raid parameters for a p410i g6 raid 5?
Personally I very rarely remember any RAID configs unless it's something totally exotic.
Check WinHex, there's a preset for HP RAID arrays with delayed parity, it may not fit all xL3** Proliants instantly, particularly pay attention to the stripe size - it may be set to a greater value than necessary (do not recall WH's default and don't have a PC atm).

If it won't work, then either deeper manual inspection is necessary or there's a problem with data, which is also to be solved manually.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: September 2nd, 2014, 8:26 
Offline

Joined: February 24th, 2011, 9:27
Posts: 88
Location: East Coast
Thanks for the interest guys. I solved this case before the weekend.


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: September 3rd, 2014, 5:34 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 809
Location: World
HI JAr

Can you report solution?
thanks


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: January 9th, 2015, 9:57 
Offline

Joined: April 16th, 2008, 4:50
Posts: 264
Hello,

Can Anyone know /willing to share the raid parameters for a p410i g6 controller for RAID 5 Configuration. Specially the default offset and strip size.

Thanks


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: January 12th, 2015, 15:09 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
ROb wrote:
Hello,

Can Anyone know /willing to share the raid parameters for a p410i g6 controller for RAID 5 Configuration. Specially the default offset and strip size.

Thanks


Offset: 088000h
Stripe size: 01000h
Delay: 16
You can find everything this in HP service area located on the drives.

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: January 16th, 2015, 9:29 
Offline

Joined: April 16th, 2008, 4:50
Posts: 264
Hello Dr-keiv,
I tried the parameters shared by you for HP Smart array p410i RAID Controller but did not get success in it.
To simplify the matter i tried took new drives connected three drives of same capacity and build the RAID 5 volume with default parameters on the same server.
Now i know the STRIP size, block order/ Rotation. Still i am unable to get proper data out of this experimental volume.
I am missing somewhere offset possible or the PARITY delay and First Parity.
Any suggestion how does one identify these parameters manually.
Thanks for sharing the info.


Top
 Profile  
 
 Post subject: HP p410i G6 Raid recovery
PostPosted: January 16th, 2015, 10:26 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
ROb wrote:
Any suggestion how does one identify these parameters manually.
If you have the volume you know everything about, do not build it in the GUI right away, but analyze on a lower level, e.g. with a hex editor you have.

Should you still need an assistance with the client's array afterwards, I'll be glad to help recovering it remotely.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: February 18th, 2015, 2:21 
Offline

Joined: April 16th, 2008, 4:50
Posts: 264
Thank You All for your suggestion.
Specially DR-Kiev and Dimitri.
As suggested, i inspected all the elements and was able to successfully recover the data.
A HAPPY CLIENT :D :D


Top
 Profile  
 
 Post subject: hp p410i G6 data recovery
PostPosted: February 18th, 2015, 4:11 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
Well, I think it's also worth saying thanks to your client for being patient :)

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: September 30th, 2022, 21:48 
Offline

Joined: March 20th, 2018, 7:55
Posts: 124
Location: Los Angeles
I know this is old ... but this sucks!!! lol.

The only way I can get the configuration of this old ass POS's RAID config ...
is if I buy a product which fan fix the SA of SAS drives. :'(

(And PC3000 doesn't even do SAS SSD under any circumstance according to emails) ...

And this customer? Had multiple configurations which I have to somehow figure out wtf they were.

One is def a RAID-1 thrown in for good measure: Was he mirroring one of the drives from the RAID-5 !?

It'd degraded ... i think. I don't even know if he knows if that drive was part of this 8-drive set! lol

Is it configured as "Right" or "Left" RAID ..?

Holy shit this one's a pita.


Top
 Profile  
 
 Post subject: Re: p410i G6 Raid Configuration
PostPosted: October 3rd, 2022, 4:23 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
trumanhw wrote:
I know this is old ... but this sucks!!! lol.

The only way I can get the configuration of this old ass POS's RAID config ...
is if I buy a product which fan fix the SA of SAS drives. :'(

(And PC3000 doesn't even do SAS SSD under any circumstance according to emails) ...

And this customer? Had multiple configurations which I have to somehow figure out wtf they were.

One is def a RAID-1 thrown in for good measure: Was he mirroring one of the drives from the RAID-5 !?

It'd degraded ... i think. I don't even know if he knows if that drive was part of this 8-drive set! lol

Is it configured as "Right" or "Left" RAID ..?


Holy shit this one's a pita.

Left asymmetric with parity delay. Offset from 1088

_________________
Angel Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 72 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group