MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
sempre
 Post subject: st250dm000
PostPosted: October 7th, 2014, 16:20 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: st250dm000
PostPosted: October 7th, 2014, 16:27 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...


short...
is new log...
apparently ready but not the access terminal ..

Boot 0x10M
Spin Up[0x00000000][0x00000000]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x00025CB4][0x00025CB4]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWYWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x0000B319][0x0000B319]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x00030FCD][0x00030FCD]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005
LED:000000EE FAddr:001028A6

_________________
Нет ничего невозможного
Top
 Profile  
 
data-medics
 Post subject: Re: st250dm000
PostPosted: October 7th, 2014, 18:22 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Bad read/write heads.

Have fun.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
sempre
 Post subject: Re: st250dm000
PostPosted: October 9th, 2014, 8:36 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
data-medics wrote:
Bad read/write heads.

Have fun.


Thanks!

Sorry,
Swap heads?

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: st250dm000
PostPosted: October 9th, 2014, 8:44 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...


Hi gurus!!! :mrgreen:

Some other comet? :?:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: st250dm000
PostPosted: October 9th, 2014, 9:39 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
log with motor alone (pcb)

Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
LED:000000EE FAddr:001028A6

no access terminal (ctrl + z)

_________________
Нет ничего невозможного
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 40 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group