ST1000LM010 Any Solution for Error Code 1009 Yet?

[ddrecovery]

This drive will come up in the F3 utility and reads the Drive Family and ID. But any other interaction with the drive causes it to remain BSY. Cannot clear smart, no utility status, cannot read SA etc. I searched this forum and there are similar posts, but no-one had a solution. Has anyone found one?

Rst 0x10M
RW: Disc Ctlr Initialization Completed.
(P) SATA Reset

SIM Error 1009
RW Error 00000080
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B
LED:000000BD FAddr:0000602B

[fzabkar]

http://ts.acelaboratory.com/index.php?/ ... a-sys-file

[LarrySabo]

It's a one-click repair on a DFL-DDP (or DFL-DE): http://www.dolphindatalab.com/one-click ... y-dfl-ddp/

[northwind]

The solution has been documented a long time ago.

[fzabkar]

The solution has been documented a long time ago.

Thank you for your contribution.

[northwind]

You're most welcome.

[ddrecovery]

Thank you guys, I did find this on the Ace Labs site. Hopefully now its been documented on this site as well, people will find it more easily.