Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Looking for loader/mod 11 version 3006G Firebird

November 5th, 2014, 8:47

anyone has this?
thank you

Re: Looking for loader/mod 11 version 3006G Firebird

November 5th, 2014, 9:52

Here it is....


>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1420
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.6GB
>ROM generation.......................... : 03.6HB
>Link table version...................... : TP.46.
>Consolidated ROM version................ : 0003006G
>
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 70 342
>SA regions address...................... : by default
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 00030052
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
Attachments
11.rar
(383.31 KiB) Downloaded 362 times

Re: Looking for loader/mod 11 version 3006G Firebird

November 5th, 2014, 9:53

Try firmware finder with Ultratec UK or datarecoverydonors.com - firmware section.

Re: Looking for loader/mod 11 version 3006G Firebird

November 6th, 2014, 5:55

thanks pcimage
Post a reply