MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
gps31
 Post subject: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 3:26 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
I have 4 ST500DM002 drives. One Drive working without problem and other 3 not detected by bios and no terminal Access.

When i read all four Adaptive roms there are some starting and ending offset difference (000404D0 to 00056180) ie. Starting offset is same in all four but ending is difference. In that Block there are 8bits data missing in all non working drives and i can't find them exactly.

Can anyone analyze them. pls

thanks in advance


Attachments:
ST500DM002.rar [547.82 KiB]
Downloaded 288 times
Top
 Profile  
 
Tomset
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 4:46 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
ROM is not being.
Unless the board reversed.

With no native ROM these disks not work.

Verify
S/N Z3TAXRRN <- 500dm002_NotWork1.bin
Z2AC3C41 <- 500dm002_NotWork2.bin
Z3TSMTBZ <- 500dm002_NotWork3.bin
Z6E00W4L <- 500dm002_Working.bin

if ok.
problems with the heads or SA
Top
 Profile  
 
fzabkar
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 5:01 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Just FYI, there appear to be 5 sections in your ROMs.

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  B3 00 00 00 30 00 00 00 40 00 00 00 CE 3F 04 00
00000010  17 28 00 00 13 00 04 00 24 00 00 01 22 00 00 04
00000020  23 00 00 06 00 00 00 08

Code:
Offset(h) 00 01 02 03

00000010  17 28 00 00
00000014  13 00 04 00
00000018  24 00 00 01
0000001C  22 00 00 04
00000020  23 00 00 06
00000024  00 00 00 08

    0x00028 - 0x003FF
    0x00400 - 0x0FFFF
    0x10000 - 0x3FFFF
    0x40000 - 0x5FFFF
    0x60000 - 0x7FFFF

_________________
A backup a day keeps DR away.
Top
 Profile  
 
gps31
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 5:02 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
all pcb are with their rom & disk. serial numbers are correct.

my question is why the offset differ?
Top
 Profile  
 
Tomset
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 5:14 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
F3 architecture disks are always different the offset in ROM
Compiled locally for each disk.
Top
 Profile  
 
day1data
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 10th, 2015, 10:44 
Offline
User avatar

Joined: January 6th, 2015, 2:21
Posts: 186
Location: Germany
gps31 wrote:
I have 4 ST500DM002 drives. One Drive working without problem and other 3 not detected by bios and no terminal Access.

When i read all four Adaptive roms there are some starting and ending offset difference (000404D0 to 00056180) ie. Starting offset is same in all four but ending is difference. In that Block there are 8bits data missing in all non working drives and i can't find them exactly.

Can anyone analyze them. pls

thanks in advance


When you say no terminal access is there any terminal output at all? If the ROM is corrupt on F3 drives you should get a terminal output like "checksum error" and no spin up. Do the drives spin up at all?

_________________
Web: https://www.day1data.de
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 11th, 2015, 6:32 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
gps31 wrote:
I have 4 ST500DM002 drives. One Drive working without problem and other 3 not detected by bios and no terminal Access.

When i read all four Adaptive roms there are some starting and ending offset difference (000404D0 to 00056180) ie. Starting offset is same in all four but ending is difference. In that Block there are 8bits data missing in all non working drives and i can't find them exactly.

Can anyone analyze them. pls

thanks in advance


Hi ,
Where Are You From In India ? .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
gps31
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 11th, 2015, 7:18 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
Quote:
Hi ,
Where Are You From In India ? .

Madurai, Tamil Nadu
Top
 Profile  
 
gps31
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 11th, 2015, 8:09 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
Quote:
When you say no terminal access is there any terminal output at all? If the ROM is corrupt on F3 drives you should get a terminal output like "checksum error" and no spin up. Do the drives spin up at all?


Regularly ( With and Without Ctl+Z)

Quote:
Boot 0x10M

Spin Up[0x00000000][0x0000B67C][0x0000BA10]


Trans.

Rst 0x10M

MC Internal LPC Process

Spin Up

(P) SATA Reset


some times with Ctl+Z

Quote:
Boot 0x10M

Spin Up[0x00000000][0x0000B67C][0x0000BA10]


Trans.

Rst 0x10M

MC Internal LPC Process

Spin Up
ASCII Diag mode

F3 T>


(P) SATA Reset
Top
 Profile  
 
gps31
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 13th, 2015, 9:08 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
is Nothing Possible?
Top
 Profile  
 
gps31
 Post subject: Re: ST500DM002 Adaptive ROM Doubt
PostPosted: January 13th, 2015, 22:54 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
The same problem in another two hard disk st500dm002 with terminal output

Quote:
Boot 0x10M

Spin Up[0x00000000][0x0000B67C][0x0000BA10]


Trans.

Rst 0x10M

MC Internal LPC Process

Spin Up
ASCII Diag mode

F3 T>


(P) SATA Reset


Pls advice and further Procedure
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: jimmydata and 143 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group