Hello, my HD has stopped working.

It was working in a server that runs 24/7 as a data disk.

It stopped working when the system was running with no data transfer to the Samsung.

I want to try to change the PCB from another HD the serial on my disc is S246J9BSB02761, the serial from the donor is S246JDWSB36076 and S246J9CB135622.

Will one of these fit?

Thanks and greetings,

Erik.

It clicks about 12 times and stops indeed!

II will buy an adaptor tomorow, how must I connect it?

Thanks and greetings,

Erik.

Thanks for the answer, the back om my Hd is different as in the link, see picture



I want to biuy this convertor :



Wich color on wich connector?

Do I need software for the TTL tool?

Lo of questions for me...

Thanks and greetings,

Erik.

I know Spildit loves getting everyone to buy terminal adapters to check the readout on their Seagate drives. But the fact is you have a 99.9% chance that's it's either bad read/write heads or damaged media. In either event there is absolutely nothing you can do yourself, so why bother.

If the data is important, just send it to a professional data recovery company. Trust me.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company