All times are UTC - 5 hours [ DST ]


Switch to mobile style


Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: u320 on 32bit with 50pin
PostPosted: March 26th, 2015, 21:22 
Offline

Joined: March 26th, 2015, 21:00
Posts: 1
Location: Brisbane, Australia
Hi,
I have been going through a pile of hdds I have collected over the years (about 50 of them) mainly to clean then off and throw them out. I came across 3 x36GB 10K U320 (BD03695A27) disks that had been a raid 5 array in a Netware 5.0 server. All seem to be in good condition. I have an adaptec 29160 64 bit pci card but only 32bit pci on the motherboard.
The 68 pin cable that was with it has been damage - some cables broken , terminator smashed.
I have working 50pin cables, terminators and 68-50pin.
I was thinking about using the disks in a basic Linux machine
My question is since it is only u160 card and a 32bit pci slot would there be any point spending money on a 68 pin cable or will the performance be the similar with the 50 pin?
Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group