Samsung (Seagate) 2.5" ST1000LM024 Issue

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
ddrecovery
  • ddrecovery
  • Posts: 1710
  • Joined: June 11th, 2013, 17:01
  • Location: Phoenix, AZ USA
  • Website

Samsung (Seagate) 2.5" ST1000LM024 Issue

March 27th, 2015, 19:15

I have not worked on these drives much, so still in the process of understanding them. This drive behaves like it has the Seagate Translator or LED:000000CC problem. The drive spins up okay and I have completed a resources backup. Drive also has complete HDD ID and all major modules read fine. I can go into any sector and the sector reads, but reading any other sector directly afterwards caused the drive to go BSY. FIPS module reading checksum reads okay. Terminal log attached. Any advice on how to approach this? Like I say, relatively new to this one.
Attachments
Samsung ST1000LM024.txt
(1.92 KiB) Downloaded 638 times
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index