Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

WD Firmware request 30078

April 15th, 2015, 8:52

Hello there,

Please I'd appreciate if somebody could share a firmware for the following drive (need loader):

Man.: WD
Model: WD10JMVW
FW version: 00030078

Thank you very much.

Re: WD Firmware request 30078

April 15th, 2015, 9:03

Full model and family please.

Re: WD Firmware request 30078

April 15th, 2015, 9:07

Sorry, the family is 11S5XS0 (that also completes the model). Can't find a FW match in hddguru files...

Cheers.

Re: WD Firmware request 30078

April 15th, 2015, 9:32

deftrue wrote:Man.: WD
Model: WD10JMVW
FW version: 00030078


probably a Firebird family,

Re: WD Firmware request 30078

April 15th, 2015, 9:37

Yes, definitely is Firebird. Looks like I had one with that FW here before as a heads donor, but apparently I never backed up the modules/tracks. I only backed up the ROM. Too bad.

Re: WD Firmware request 30078

April 15th, 2015, 10:01

Yep, it's a Firebird - or at least, the PCB is recognized as such.

Cheers

Re: WD Firmware request 30078

April 15th, 2015, 10:05

Hi,
You're welcome...

Mikippp

Code:
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.78C
>ROM generation.......................... : 03.79C
>Link table version...................... : TP.4D.
>Consolidated ROM version................ : 00030078
>
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 73 266
>SA regions address...................... : by default
>SA Translator loading................... : Ok
!SA defects assigned..................... : 3
>
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 00030078
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
>
Attachments
ROM.zip
(648.67 KiB) Downloaded 323 times

Re: WD Firmware request 30078

April 15th, 2015, 10:17

Mikippp wrote:Hi,
You're welcome...

Mikippp

Code:
>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.78C
>ROM generation.......................... : 03.79C
>Link table version...................... : TP.4D.
>Consolidated ROM version................ : 00030078
>
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 73 266
>SA regions address...................... : by default
>SA Translator loading................... : Ok
!SA defects assigned..................... : 3
>
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 00030078
>
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
>


Thank you very much :wink:
Post a reply