Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

sony svs13a1v8r died ssd 128gb

August 1st, 2015, 17:06

hi, I apologize for my poor English. the problem is this - the laptop sony svs13a1v8r broke the ribbon cable and then the connector. schematic of the plume. can be experienced?
Attachments
image.jpg
image.jpg
image.jpg

Re: sony svs13a1v8r died ssd 128gb

August 1st, 2015, 17:32

need cable diagram. maybe someone can help?

Re: sony svs13a1v8r died ssd 128gb

August 1st, 2015, 17:38

http://www.aliexpress.com/store/product ... 82122.html

Re: sony svs13a1v8r died ssd 128gb

August 3rd, 2015, 1:12

Here is the Sata pinout
Attachments
image_2.jpg

Re: sony svs13a1v8r died ssd 128gb

August 3rd, 2015, 2:06

ISTM that there are two separate SSDs, one on each side.
Attachments
pinout.jpg

Re: sony svs13a1v8r died ssd 128gb

August 3rd, 2015, 4:03

viewtopic.php?f=1&t=18418&start=60

Here is a regular single SSD using the same flash controller (S4LJ204X01):

http://www.storagereview.com/images/Sam ... CB-Top.jpg

You can see how the SATA Tx/Rx pairs are wired to a regular SATA connector.
Post a reply