Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERROR

August 11th, 2015, 4:31

i couldn't format partition of user this drive.

continuosly LED error at all attempt


F3 1>N1

Init SMART Fail
Rst 0x40M
LED:000000BD FAddr:00004C51
LED:000000BD FAddr:00004C51



F3 T>r17a

DiagError 0000000E
F3 T>r133

DiagError 0000000E
F3 T>r28

DiagError 0000000E
F3 T>r35

DiagError 0000000E
F3 T>m0,6,3,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max Iterations = 01, Max Certify Rewr
ite Retries = 2DF8

Init SMART Fail
Rst 0x40M
LED:000000BD FAddr:00004C51
LED:000000BD FAddr:00004C51

LED:000000BD FAddr:00004C51
LED:000000BD FAddr:00004C51
LED:000000BD FAddr:00004C51

Re: ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERR

August 11th, 2015, 5:31

upload the terminal log where it says SIM ERROR

Re: ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERR

August 11th, 2015, 6:54

chinopk wrote:upload the terminal log where it says SIM ERROR


i don't remember.. but it's true..but drive is dead now.

i want to isolate head contact when sending command. and now head locked. MOTOR don't spin.

Want to shock terapy but i killed the patient drive.. drive spins 8 times and stop. head's gone.

i condemn jaclaz :cry: :cry: :cry: because he don't warn me.

(perhaps he had to have shorted the pins and didn´t??),

Exactly, that's the idea of "shorting the read channel", to overcome the LED:00000xxx message.

jaclaz

Re: ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERR

August 14th, 2015, 4:05

:shock:

i condemn jaclaz :cry: :cry: :cry: because he don't warn me.


I'm afraid condemning anybody else than yourself is the biggest mistake you can make in this situation.

Do you guys really think there are two magic commands to repair seagates and do them brainlessly, then complain that the case got worse. I feel like i am in the middle age :s

Re: ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERR

August 14th, 2015, 8:38

pepe wrote::shock:

i condemn jaclaz :cry: :cry: :cry: because he don't warn me.


I'm afraid condemning anybody else than yourself is the biggest mistake you can make in this situation.

Do you guys really think there are two magic commands to repair seagates and do them brainlessly, then complain that the case got worse. I feel like i am in the middle age :s


+1 +1 +1 :lol:

If you tried things without knowing what you're doing, you can only blame yourself. It's the difference between knowledge and wisdom. A little knowledge can make a person dangerous, but a wise person will know his limitations and when to seek help.

Re: ST2000DL003 LED:000000BD FAddr:00004C51 AND SIM 1009 ERR

August 14th, 2015, 9:10

have you tried shock therapy on it :?:
seek professional help on this if it is still recoverable at all !
Post a reply