drive stop spinning BUT can access TERMINAL

[sosrecup]

hello,

I have a Seagate ST9500325AS that spin then stop after I hear noise (but not click or beep) but I can access Terminal even after the drive stop. Here the terminal output :

Rst 0x08M
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>

F3 T>

F3 T>

F3 T>

F3 T>
RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00 00 A0 E1
opts = 00000000

RW Err = 84150180


F3 T>

F3 T>

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.123 msecs
F3 2>U

DiagError 00006008
Spin Error
Elapsed Time 16.840 secs
R/W Status 2 R/W Error 84150180
F3 2>

F3 2>

F3 2>/1

F3 1>N1

LED:000000CC FAddr:0026A86F
LED:000000CC FAddr:0026A86F
LED:000000CC FAddr:0026A86F
LED:000000CC FAddr:0026A86F

Could it be a FW and not Head issue?

[jermy]

http://acelaboratory.ru/forum/viewtopic ... 4d1#p29308

[sosrecup]

Thank you for your reply.

The solution proposed is when drive ID is read and drive continue spinning. In my case, drive stop spinning but I can access terminal

[pepe]

Heads....
+ probably surface.

[chinopk]

Heads....
+ probably surface.

+1 heads + surface
get ready for more than 1 donor

[jermy]

The solution proposed is when drive ID is read and drive continue spinning. In my case, drive stop spinning but I can access terminal

sorry didn't noticed, i thought that you manually stop the spinning by /2Z command

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.123 msecs

[sosrecup]

sorry didn't noticed, i thought that you manually stop the spinning by /2Z command

As I had access to terminal, I tied to stop then start the drive by Terminal command which worked for STOP but not for START

I think it's more likely a head issue.

[jermy]

I think it's more likely a head issue.

agreed