hARD DISK SHOW FULL BAD SECTOR HOW TO REPAIR THIS I NEED DATA

SPU @ 28'C, 5107mV
IS = 3
CLA ..36 / 89
HO..OK
HO RPM = 604 OK
AC 1824
ST..OK
mS1 00000003
GT: 423
SC (L): 4104/12
BE.N: 15
LD..OK
SK C: 6837 H: 0
Loaded FIT (0: 0: 1)
CalibTable Loaded. Rev: 0x1B
ResoTable Loaded. Rev: 0x01
Bump Limit Loaded. Rev: 0x01
RRO1xTable Loaded. Rev: 0x01
Fw Active 00
Ovly loaded to 0x00014D00
Ovly loaded to 0x1002E068
FdtTable Loaded. Rev: 0x02
Up MC

PwrOn RRO1x @ H0
Table) cos = 563456, sin = 576000
Coeff) cos = 29592, sin = -68817


DiskSlip: 114 [SrvTrk]
DiskSlip: 112 [SrvTrk]

PwrOn RRO1x @ H2
Table) cos = 601088, sin = 448000
Coeff) cos = -16539, sin = 45140


DiskSlip: 106 [SrvTrk]
DiskSlip: 105 [SrvTrk]
TgtCyl: 832
Hd: 0 Zn: 0 Avg.: - 302
TgtCyl: 266176
Hd: 0 Zn: 1 Avg .: 1001

SVCAL (0080,0000) -> PASS
ReadyTime = 4455690 us



[DIPM_TMOUT: 00000000]
ENG> mS1 00000003
SK C: 153531 H: 0
SC (U) .. 4104 / -42
UD..OK: -42
PK_4 C: 48 H: 0