View topic - ST1000DM003 Bios does not recognize

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST1000DM003 Bios does not recognize

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

adam_wad

Post subject: ST1000DM003 Bios does not recognize

Posted: January 21st, 2016, 2:48

Joined: January 19th, 2016, 17:06
Posts: 2
Location: Poland

Hello, sorry for my english, I am a programmer and I found this forum, you known every when we have some problem we try to search knownedge in web and I land here, very nice forum.

I have problem with this hard drive.

I have log from terminal

Code:

Boot 0x40M
 Spin Up
TCC-001D[0x000065B4][0x00006A20][0x00006E8C]
 Trans.

Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001D
(P) SATA Reset

 MCMainPOR: Start:
 Check MCMT Version: Current
 MCMainPOR: Non-Init Case
 MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
 MCMainPOR:  MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
  Max number of MC segments 0A61
 Nonvolatile MCMT sequence number 0004FDE0
 [RSRS] 0527
ProcessRWError -Read-   at LBA 00000000000431A9  Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 00000000000431A9!

[SW] 0022
[SW] 0022
[SW] 0021
[SW] 0021
Reconstruction: Completed 1:  Reconstruction occurred
[MCMTWS]
Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001D
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
.......story ends 50 attempts 

Could you explain me, what's mean LED:00000047 FAddr:FFFFFFFE

Can I do something to back my data
Ideas for what I should do next?

Thank you in advance.

Top

drHDD

Post subject: Re: ST1000DM003 Bios does not recognize

Posted: January 21st, 2016, 21:34

Joined: October 5th, 2015, 18:53
Posts: 488
Location: US

LED:00000047 - Stack pointer out of range.
If you need data - go to pro.

Top

adam_wad

Post subject: Re: ST1000DM003 Bios does not recognize

Posted: January 25th, 2016, 2:40

Joined: January 19th, 2016, 17:06
Posts: 2
Location: Poland

Thanks,

Can I do something if I don't need data ?

You known some DIY

Top

Amarbir[CDR-Labs]

Post subject: Re: ST1000DM003 Bios does not recognize

Posted: January 25th, 2016, 5:02

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

drHDD wrote:

LED:00000047 - Stack pointer out of range.
If you need data - go to pro.

Well,
Saw Some of Your Posts At Acelab Also .You Are Good At Work Sir ,I Take My Words Back That i had posted long time back when you just started posting .Also you should remember we cannot just recommend someone we do not know and has just started posting to the forum .I Hope .In this case i also see a message that says its reallocating some sectors .Might be he could disable that and also Media cache messages [ disabling that might help ] . And you are correct he should go to a Pro .And on the lighter note poland is full of talent

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum