I used HddSuptertool 1.5 lattest build in Partition magic linux (hiren boot cd 15.2)


When i try to read mod 02 and mod 32 i m getting "Command failed!"

the log

SC menu
q) Quit
p) Previous menu
h) Toggle script help
1) WD dump mod 42 (older drives)
2) WD royl dump mod 02
3) WD royl dump mod 32
4) WD royl patch mod 02 (slow fix)
5) WD royl patch mod 32 (slow fix)
6) WD royl dump all modules
Enter your choice:
> 3
3
Model: WDC WD10JMVW-11AJGS2
Serial: WD-WXJ1EA3LZFH5
Command failed!
sense_key=0xb asc=0x0 ascq=0x0
error=0x0 count=0x0 lba=0x0 device=0x0 status=0x0 altstatus=0x0
command_status= 0x0
data_transferred= 0x200

VSC menu
q) Quit
p) Previous menu
h) Toggle script help
1) WD dump mod 42 (older drives)
2) WD royl dump mod 02
3) WD royl dump mod 32
4) WD royl patch mod 02 (slow fix)
5) WD royl patch mod 32 (slow fix)
6) WD royl dump all modules
Enter your choice:
> 2
2
Model: WDC WD10JMVW-11AJGS2
Serial: WD-WXJ1EA3LZFH5
Command failed!
sense_key=0xb asc=0x0 ascq=0x0
error=0x0 count=0x0 lba=0x0 device=0x0 status=0x0 altstatus=0x0
command_status= 0x0
data_transferred= 0x200

VSC menu
q) Quit
p) Previous menu
h) Toggle script help
1) WD dump mod 42 (older drives)
2) WD royl dump mod 02
3) WD royl dump mod 32
4) WD royl patch mod 02 (slow fix)
5) WD royl patch mod 32 (slow fix)
6) WD royl dump all modules
Enter your choice:
> 6
6
Model: WDC WD10JMVW-11AJGS2
Serial: WD-WXJ1EA3LZFH5
Command failed!
sense_key=0xb asc=0x0 ascq=0x0
error=0x0 count=0x0 lba=0x0 device=0x0 status=0x0 altstatus=0x0
command_status= 0x0
data_transferred= 0x200

is there any chance to fix without changing to SATA PCB

Note: HDD is working with very very slow speed

I think that might be a SED locked drive. Not positive, but a good chance it is.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

You should e-mail sdcomputingservice@gmail.com

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5
Instagram https://www.instagram.com/datarecovery_morde.pt/