Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 4 of 4
  [ 78 posts ]  Go to page Previous  1, 2, 3, 4
  Previous topic | Next topic 
Author Message
Doomer
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 15th, 2016, 17:51 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3558
Location: Chicago
fzabkar wrote:
If it's not possible, then just use the test points on the top side. The test points in each pair are in close proximity to each other. It doesn't matter if the two Tx test points are not adjacent to the two Rx test points. Just keep each pair of conductors the same length as much as possible.

Essentially that is the solution that everybody tries to use for WD PCBs. And with short enough wires it will work.
What was your point of denying it?
PS: that's was a rhetorical question

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
fzabkar
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 15th, 2016, 21:28 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14945
Location: Australia
Here is how an expert does it.

How to connect and recover USB-only western digital drives with HD Doctor suite:
http://www.datarecoverytools.co.uk/2010 ... tor-suite/

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Doomer
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 15th, 2016, 23:45 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3558
Location: Chicago
fzabkar wrote:
Here is how an expert does it.

It's funny, 'cause it's so called "long mess". Pretty low standard for "an engineer"
Anyway - it won't work on PebbleBeach.

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 16th, 2016, 0:39 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3155
Location: Atlanta, GA
fzabkar wrote:
Here is how an expert does it.


You're impressed by this? Really? :roll:

How does that rat's nest fit into your points about transmission line reflections, line impedances, etc? Looks to me that you've got a pretty nice antenna / RF transmitter there. But don't take my word for it -- I'm not an "expert." :-)

I think the cables are too long and unshielded to work with some [other] WD drives.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
fzabkar
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 16th, 2016, 2:03 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14945
Location: Australia
LOL. You both missed the obvious sarcasm. The tutorial comes from a SalvationData blog. Clearly the author (who is well known to you) has no understanding of the concepts involved. It boggles my mind that this ugly mess works at all.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 16th, 2016, 9:40 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3155
Location: Atlanta, GA
Yup. Missed your sarcasm.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Doomer
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 16th, 2016, 10:41 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3558
Location: Chicago
fzabkar wrote:
Clearly the author (who is well known to you)

Again, with assumptions.

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
Mikippp
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: April 21st, 2016, 10:05 
Offline

Joined: May 30th, 2005, 17:07
Posts: 523
Hi,
Needed loader

Mikippp

Code:
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 382 735
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 02.0MD
ROM F/W version......................... : 0002000M
Overlay F/W version..................... : 02.0MD
Servo F/W version....................... : 04.0J

Heads configuration..................... : by map
Heads number............................ : 10
Heads number in use..................... : 10
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5,6,7,8,9
Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: July 20th, 2016, 11:03 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1039
Location: South Africa
Has anyone actually tested a SATA PCB on this? PCB being 2060-800022-000
I'm trying to get my hands on one, but I'm not paying $700.


Attachments:
3tb.PNG
3tb.PNG [ 200.67 KiB | Viewed 10399 times ]

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
Doomer
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: July 20th, 2016, 12:56 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3558
Location: Chicago
Nick_CT wrote:
Has anyone actually tested a SATA PCB on this? PCB being 2060-800022-000

Yes, it works

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: July 21st, 2016, 3:57 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1039
Location: South Africa
Doomer wrote:
Nick_CT wrote:
Has anyone actually tested a SATA PCB on this? PCB being 2060-800022-000

Yes, it works


Thank you.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
saltwater
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 18th, 2017, 7:56 
Offline
User avatar

Joined: November 3rd, 2013, 13:04
Posts: 319
Location: Hungary
Hello friends!
I have a case with this kind of drive (WD30NMVW-11C3NS2)
I think the drive has a slow responding problem, but i cant access to SA.
I converted the USB PCB to SATA (yes, is removed capacitors), but now the drive stays BSY forever even when i short TV9-TV10, or separate HSA contact.

Here it is a picture of my USB-SATA conversion work.


Has anyone a deal what did i wrong?

Attachment:
IMG_20170118_122858.jpg
IMG_20170118_122858.jpg [ 4.7 MiB | Viewed 9713 times ]


Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 18th, 2017, 9:41 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1039
Location: South Africa
I've only done about 5 so far and all have been straightforward, converted to SATA by means of 2060-800022-000 and then imaged them. I haven't had the joy of one staying BSY yet.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
saltwater
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 18th, 2017, 18:26 
Offline
User avatar

Joined: November 3rd, 2013, 13:04
Posts: 319
Location: Hungary
Nick_CT wrote:
I've only done about 5 so far and all have been straightforward, converted to SATA by means of 2060-800022-000 and then imaged them. I haven't had the joy of one staying BSY yet.



It means my USB-SATA conversion work is failed :lol:
Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 19th, 2017, 16:15 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1039
Location: South Africa
I lie, one of them did involve a headswap.... the worst headswap of my life. That post is right in the way of the millions heads, really was the most frustrating half hour of my life. It worked out, but I'd rather hang myself than swap heads on one of those again.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
pcimage
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 19th, 2017, 16:38 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7855
Location: UK
Nick_CT wrote:
I lie, one of them did involve a headswap.... the worst headswap of my life. That post is right in the way of the millions heads, really was the most frustrating half hour of my life. It worked out, but I'd rather hang myself than swap heads on one of those again.


Maybe my method is different, but I've done several head swaps on these with no problems.

5 mins to take out and 5 mins to re-install :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
JGAN
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 20th, 2017, 23:17 
Offline

Joined: November 27th, 2012, 21:59
Posts: 94
Location: Upstate NY, USA
saltwater wrote:
Nick_CT wrote:
I've only done about 5 so far and all have been straightforward, converted to SATA by means of 2060-800022-000 and then imaged them. I haven't had the joy of one staying BSY yet.



It means my USB-SATA conversion work is failed :lol:


I don't think so. I don't think you would even be able to tell the drive is in busy mode if you soldered it wrong, but you should get a second opinion on this.

Otherwise, try putting the drive in kernel mode and following the instructions here: http://blog.acelaboratory.com/pc-3000-h ... oblem.html
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: January 21st, 2017, 14:57 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3155
Location: Atlanta, GA
Nick_CT wrote:
I lie, one of them did involve a headswap.... the worst headswap of my life. That post is right in the way of the millions heads, really was the most frustrating half hour of my life. It worked out, but I'd rather hang myself than swap heads on one of those again.


Remind me to send you some head combs.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 4
  [ 78 posts ]  Go to page Previous  1, 2, 3, 4

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google Adsense [Bot] and 74 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group