MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
gps31
 Post subject: ST9500423AS - Problem
PostPosted: April 6th, 2016, 12:00 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
Thx Mr fzabkar, for PCB Solution

Now the drive spin and detected in windows but take too much time but disk can't initialized (Shows correct Size)

Terminal Log

Quote:
EarlySpinup Enabled
Rst 0x10M
(P) SATA Reset

RAW OFF
PASS
SIM Error 3005
RW Error
[PORFAIL:MC.disabled]



ASCII Diag mode

F3 T>


Then Tried to read SYSFiles
Result
Quote:
Got F3 T>r01b

DiagError 0000000E


The same result for any sysfile from copy 0 but i can read any sysfile from copy 1
So i written sysfiles 1B, 35, 28, 29, 133 from copy 1 to copy 0 without any errors

After Power on reset again i can't read any sysfile from copy 0

i think this model has no 17a since both copy return
Quote:
F3 T>r17a

DiagError 00000024
F3 T>r17a,3,1

DiagError 00000024


ctrl+X returns with some errors

Quote:
RW 32 Cmds
Ts(ms) dT(ms) xT(ms) Type Option Mode St EC Info


0022844 L 00000018 BO 000000 BES 005F740.006093F.005F740 697883 347375 345 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000
0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00 698228 345 2149 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000
0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00 707468 9240 337 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000
0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00 707805 337 2150 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000


Let me know the Problematic System files & what i have to do next i have only STcom tool

Note: Sorry for this double posts since this is separate problem
Top
 Profile  
 
labtech
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 6th, 2016, 15:39 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Short of testing all system files, it is not easy to tell which system files are problematic for this model drive. Or at least I have not found a way, yet.

Needless to say, seems like a new head assembly is needed in your case.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
labtech
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 10:02 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Can you display the entire lines of the output for your three lines, please? I would like to try an experiment. Thanks.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
gps31
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 11:23 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
Quote:
RW 32 Cmds
Ts(ms) dT(ms) xT(ms) Type Option Mode St EC Info
188390 99999999 7 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 00223C4 L 00000040 BO 000000 BES 005F740.006093F.005F740
197396 9006 2 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022404 L 00000040 BO 000000 BES 005F740.006093F.005F740
206415 9019 1 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022444 L 00000040 BO 000000 BES 005F740.006093F.005F740
215410 8995 8 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022484 L 00000040 BO 000000 BES 005F740.006093F.005F740
224435 9025 9 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 00224C4 L 00000040 BO 000000 BES 005F740.006093F.005F740
233431 8996 6 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022504 L 00000040 BO 000000 BES 005F740.006093F.005F740
242439 9008 8 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022544 L 00000040 BO 000000 BES 005F740.006093F.005F740
251440 9001 8 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022584 L 00000040 BO 000000 BES 005F740.006093F.005F740
260461 9021 4 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 00225C4 L 00000040 BO 000000 BES 005F740.006093F.005F740
269459 8998 8 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022604 L 00000040 BO 000000 BES 005F740.006093F.005F740
278478 9019 6 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022644 L 00000040 BO 000000 BES 005F740.006093F.005F740
287473 8995 4 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022684 L 00000040 BO 000000 BES 005F740.006093F.005F740
296479 9006 8 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 00226C4 L 00000040 BO 000000 BES 005F740.006093F.005F740
305483 9004 5 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022704 L 00000040 BO 000000 BES 005F740.006093F.005F740
314499 9016 6 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022744 L 00000040 BO 000000 BES 005F740.006093F.005F740
323498 8999 9 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022784 L 00000040 BO 000000 BES 005F740.006093F.005F740
332513 9015 3 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 00227C4 L 00000040 BO 000000 BES 005F740.006093F.005F740
341507 8994 2 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022804 L 00000040 BO 000000 BES 005F740.006093F.005F740
350508 9001 2 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0022844 L 00000018 BO 000000 BES 005F740.006093F.005F740
697883 347375 345 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000 0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00
698228 345 2149 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000 0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00
707468 9240 337 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000 0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00
707805 337 2150 02 002241 000000 2 43110081 XFR RD SYS LBA B 00000 0004A89 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00
717332 9527 3 02 002241 000000 1 00000080 XFR RD SYS LBA B 00000 0026B75 L 00000001 BO 000000 BES 005AC00.005AC3F.005AC00
922078 204746 7 02 005041 000000 1 00000080 XFR WR SYS LBA B 00000 0004A89 L 00000001 BO 000000 BES 005AC40.005AC7F.005AC40
935690 13612 0 27 005041 000000 1 00000080 SND_SRV 516F 0000 0000 0000 0000 0000 0000 0000 0001 008B 00D0
0000 0000 0000 00EE 0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935692 2 0 27 005041 000000 1 00000080 SND_SRV 0501 0000 0000 0000 0000 0000 0000 0000 0001 0168 00D0
0168 0000 0000 00EE 0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935692 0 0 27 005041 000000 1 00000080 SND_SRV 0106 0000 0000 0000 0000 0000 0000 0000 0001 0168 00D0 0168 0000 0000 00EE
0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935692 0 0 27 005041 000000 1 00000080 SND_SRV 0501 008F 0000 0000 0000 0000 0000 0000 0001 5FC0 00D0 5FC0 0000 0000 00EE
0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935692 0 1 27 005041 000000 1 00000080 SND_SRV 0501 0144 0000 0000 0000 0000 0000 0000 0001 FBCF 00D0 FBCF 0000 0000 00EE
0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935693 1 0 27 005041 000000 1 00000080 SND_SRV 0001 FBCF 0000 0000 0000 0000 0000 0000 0001 FBCF 00D0 FBCF 0000 0000 00EE
0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
935693 0 0 27 005041 000000 1 00000080 SND_SRV 0201 0000 0000 0000 0001 0000 0000 0000 0001 0000 00D0 FBCF 0000 0000 00EE
0020 01AD 0CAD 09AC 13DF FEAC FAAC F2AD FAAD F6AD FBAD 09AD
Top
 Profile  
 
labtech
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 12:21 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Seems like it is sys file 133. As mentioned before, with STCom, I don't have a solution to figure it out.
So, based on the fact that you have already tried to "fix" the error concerning 133, it further supports that head 0 is a problem.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
gps31
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 12:29 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
how to disable head 0? is there any possibility using STCom tool ?
Top
 Profile  
 
labtech
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 21:30 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Sorry, I am not familiar with STCom tool. You could take a test drive and study the tool a bit and see features. Though, I am fairly confident it does not have the ability to work with heads in that manner.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
gps31
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 8th, 2016, 23:45 
Offline

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india
is STR-3000-UDMA can do?
Top
 Profile  
 
labtech
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 9th, 2016, 13:40 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
Although, I am not familiar with that one either, it seems like a cracked version software of legit old PC3000 version, which from the looks of it does not support Seagate F3 family.

Needless to say, I am not sure what your intention is, honestly. You are wasting your time.
It seems quite convincing head 0 is toast, so:
1) If you want to recover data, then a head stack swap is necessary
2) If you want to repair the drive, why waste the time, when it is not worth it?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
Dima_RnD
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 20th, 2016, 7:57 
Offline

Joined: April 20th, 2016, 7:08
Posts: 15
Location: Rostov-on-Don, Russia
Seems like head 0 doesn't read/write so first sectors are not available.
You have to build head map and try to read data from head 1.
Top
 Profile  
 
galaxy
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 24th, 2016, 3:16 
Offline

Joined: January 31st, 2014, 8:46
Posts: 242
Location: India
SIM ERROR 3005 - Mean that “format corrupted flag” in on and Translator is not loaded in RAM.
Top
 Profile  
 
galaxy
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 24th, 2016, 3:18 
Offline

Joined: January 31st, 2014, 8:46
Posts: 242
Location: India
SIM Error 3005
No HOST FIS-ReadyStatusFlags 2002A1A5
ASCII Diag mode

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 6.035 secs
F3 2>U

HighPowerMode
ExecuteSpinRequest

Spin Up Complete
Elapsed Time 3.573 secs
F3 2>/

F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewr
ite Retries = not supported

User Partition Format Successful - Elapsed Time 0 mins 00 secs

F3 T>/1

F3 1>N1

Clear SMART is completed.
F3 1>
Rst 0x08M
(P) SATA Reset
Top
 Profile  
 
galaxy
 Post subject: Re: ST9500423AS - Problem
PostPosted: April 24th, 2016, 3:22 
Offline

Joined: January 31st, 2014, 8:46
Posts: 242
Location: India
Today received a customer repair 7200.12 st3320418AS a hard disk data recovery, does not recognize disk, directly into command mode, prompting Rst 0x10M
(P) SATA Reset

(P) SATA Reset

SIM Error 3005
No HOST FIS-ReadyStatusFlags 2002A1A5
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001
ASCII Diag mode

Now to solve the journal published the following, we want to help

1. Disconnect the electrical power supply

2. When ready directly into F3T

/2

/Z

3. Motor power is turned off

/ U

F3 2> U

HighPowerMode
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.657 secs
F3 2> /

F3 T> m, 6,2 ,,,,, 22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

DiagError 0000500D
User Partition Format Failed - Elapsed Time 0 mins 00 secs
R / W Sense 00000002, R / W Error 843200A6, File Error 00000000
Blk Addr 01500001, Blk Addr Type D0, Cyl FFFF0000, Hd 28

F3 T> m0,2,2 ,,,,, 22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

DiagError 0000500D
User Partition Format Failed - Elapsed Time 0 mins 00 secs
R / W Sense 00000002, R / W Error 843200A6, File Error 00000000
Blk Addr 01500001, Blk Addr Type D0, Cyl FFFF0000, Hd 28

F3 T> i4,1,22

F3 T> / 1

F3 1> N1

Init SMART Fail
LED: 000000CC FAddr: 0024E2D
Rst 0x10MRW subfile error 2044RW subfile error 2044
SIM Error 2044
No HOST FIS-ReadyStatusFlags 2002A1A5
Rst 0x10MRW subfile error 2044RW subfile error 2044
SIM Error 2044
No HOST FIS-ReadyStatusFlags 2002A1A5
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T> m, 6,2 ,,,,, 22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

User Partition Format Successful - Elapsed Time 0 mins 00 secs
Zone re-format was skipped.
F3 T> m, 6,3 ,,,,, 22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

User Partition Format Successful - Elapsed Time 0 mins 00 secs
Zone re-format was skipped.
F3 T> i4,1,22

F3 T> / 1

F3 1> N1

Clear SMART is completed.
F3 1>
Rst 0x10M
(P) SATA Reset

ASCII Diag mode

F3 T>

Now ready, and also recognize disk, the data directly out
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc, Google [Bot] and 105 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group