Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST500DM002 Terminal Error

July 9th, 2016, 4:34

Let me know the error msg (Only PCB)

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.

Phy supports only Yeti 3.*. Drive will hang.ÿ


Note: I Don't Know whether the PCB is native or not

Re: ST500DM002 Terminal Error

July 9th, 2016, 14:43

gps31 wrote:Note: I Don't Know whether the PCB is native or not

Check the SN in ROM

Re: ST500DM002 Terminal Error

July 12th, 2016, 0:38

The problem is identified

Previous guy changed pcb with patient rom. the Boot rom version is not compatiable with that pcb.

i transferred that rom to another pcb then problem solved

Re: ST500DM002 Terminal Error

July 19th, 2016, 0:24

Hi , you can check if the SN in CAP is the same as the SN in tag. If yes, the PCB is original.

Re: ST500DM002 Terminal Error

July 20th, 2016, 1:52

Rom is original but the problem is with PCB
Post a reply