
Guys Thanks a lot for all Suggestions.
Here is my observation --
drHDD wrote:
If R-studio didn't find data - there is no data or you need pro with good knowledge of ext3/4.
This is not true ,Data is fully present on the disk , I have already traced aprox. 1.7TB data. So far I have recovered 356 GB Data.
This disk seems to be used in some factory in design dept. It is having large no. of files ( more than 4 lacs , 400000)
I have discussed case with developer and he has also confirmed that results are as per expcetations.
All I want to ensure that maximum technically possible data is extracted . If I get any other tool , that will improve my knowledge and tool collection as well.
mr_spokk wrote:
Have you tried UFS Pro or regular UFS? Pro version works quite good with Raid.
http://www.ufsexplorer.com/download_pro.phpYes I tried UFS explorer Pro evaluation version, it even failed to identify Linux partition.
And when you say Pc3000 UDMA, I assume you have the Raid edition?
No I don't have Raid edition , as lcoughey has said ,I think raid edition is not needed in this case. Unfortunately udma did not give good results.
vulture_g7 wrote:
And then, there's GParted. I know, it's not windows-based, but you don't need to have a linux partition either, just make a bootable cd or usb and you're good to go. That should work!
personally I don't have good experience with freeware tools. Often recovered data is not having proper directory structure .