Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Seagate ST3250318AS with LED:000000CD error ?

December 6th, 2016, 6:54

I have Seagate ST3250318AS it stuck on BSY

the terminal keeps giving me this over and over:
LED:000000CD FAddr:00258A17

I replaced head and still the same issue ??

HDD label attached
Attachments
WhatsApp Image 2016-11-29 at 5.21.47 PM.jpeg

Re: Seagate ST3250318AS with LED:000000CD error ?

December 6th, 2016, 7:28

May be eeprom fail
pls check eeprom with other same working board
I have same problem

Re: Seagate ST3250318AS with LED:000000CD error ?

December 6th, 2016, 11:23

prasadsv wrote:May be eeprom fail
pls check eeprom with other same working board
I have same problem


Now i got the SN and model but the size is empty
when i do anything the drive freeze with BSY DRD DSC

Re: Seagate ST3250318AS with LED:000000CD error ?

December 6th, 2016, 13:12

Have you tried F3 commands in terminal?
http://www.hddoracle.com/viewtopic.php?f=83&t=38 try this with TTL adptor

Re: Seagate ST3250318AS with LED:000000CD error ?

December 6th, 2016, 14:47

prasadsv wrote:Have you tried F3 commands in terminal?
http://www.hddoracle.com/viewtopic.php?f=83&t=38 try this with TTL adptor


This is a great way to brick the drive and make it unrecoverable. Seriously, read the GIANT RED TEXT THAT SAYS:

DON'T DO IT ON NEWER DRIVES, LIKE 7200.12 OR YOU WILL END UP HAVING FURTHER COMPLICATIONS DUE TO NRG LIST / TRANSLATOR !!!!!

Re: Seagate ST3250318AS with LED:000000CD error ?

December 7th, 2016, 5:43

head was damaged but after replaced head this happed

it clicks several times then comes to ready
after running utilities i can read model and SN good but firmware showing CC44 which is the firmware of the donor drive and the size is MB ()
when i try to do anything it stuck on BSY DRD DSC.

I have terminal access while it is ready

i am using pc3k

here is log:

Family ID by HDD ID: 3F
Selected family......................... : 3F, Pharaoh
Model by ID............................. : ST3250318AS

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...
Drive not ready
Terminal : error detecting HDD terminal baud rate




Terminal:


Rst 0x08M
ASCII Diag mode

F3 T>
Rst 0x08M


and this is log when I try to clear SMART:

Executing user command.................. : Clear SMART
ASCII Diag mode

F3 T>/1

F3 1>N1

HighPowerMode
Terminal : reply timeout error
Terminal : reply timeout error

Executing user command.................. : Show Alt-List
Terminal : reply timeout error
LED:000000CC FAddr:002851C7
Terminal : reply timeout error
Terminal : reply timeout error
Post a reply