MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: HP MSA P2000 G3 SAN
PostPosted: January 7th, 2017, 5:43 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
Hi all

Anyone know about default RAID parity rotation, block size and parity delay on HP MSA P2000 SAN storage?
I check with most RAID software's and can not find correct values!

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 7th, 2017, 7:54 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
You will need a Winhex & Eagles Eye to find those values. none of the softwares will get those values for you.
i can offer you a quick remote session. but the (Quot. will be 300$ per drive).

PM if needed.

good luck

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 7th, 2017, 11:39 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
WinHex can not find!

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 7th, 2017, 12:57 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
databack wrote:
WinHex can not find!


Winhex CAN, needed simple math. calculations only.

in fact the more you do and SOLVE cases the more COMMON PATTERNS you will find/discover in RAID

Again "if you notice them". the Offer is valid if needed.

good luck again

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 8th, 2017, 1:23 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
I know about configuration: RAID 5, Block Size 64, Parity for most of HP 16, Left Async...
Winhex failed!!!

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 8th, 2017, 4:40 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
IF you are SURE about all of this then the remaining options are:

A- Drives Order.
B- RAID Altered.

Try to Dig more.. good luck

this reminds me with my prev. posted case here: viewtopic.php?f=1&t=34707

90% of "Clients are Liars"

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 8th, 2017, 6:03 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
My case is 6 FC HDD's (600Gb) and all HDD's are safe and correct number.... I check all of methods with Winhex, File Scavenger, ReclaiMe Pro, UFS Explorer, RStudio and Runtime.
Nothing....

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 8th, 2017, 7:36 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
provide me here with a Screenshot of ALL Disks in UFS/R-studio for example and i might judge

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 8th, 2017, 8:55 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
Sector 0 with R-studio


Attachments:
Capture.JPG
Capture.JPG [ 44.57 KiB | Viewed 14317 times ]
06.jpg
06.jpg [ 458.54 KiB | Viewed 14317 times ]
05.jpg
05.jpg [ 458.7 KiB | Viewed 14317 times ]
04.jpg
04.jpg [ 458.6 KiB | Viewed 14317 times ]
03.jpg
03.jpg [ 458.46 KiB | Viewed 14317 times ]
02.jpg
02.jpg [ 458.77 KiB | Viewed 14317 times ]
01.jpg
01.jpg [ 453.55 KiB | Viewed 14317 times ]

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir
Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 4:41 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
Final Q. here about this case, what is your budget for this case?

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 5:19 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
Maybe less than 300$ for all

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 6:20 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
databack wrote:
Maybe less than 300$ for all

Thats WAY to low...in my opnion. If client don't value the complexity of DR from sutch difficult Raid, they can live without it.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 6:44 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
databack wrote:
Maybe less than 300$ for all


If for such a case you charge less than 3000$, then i really suggest you change profession

As for "mr_spokk" i Agree with you, clients should VALUE the DR service.

in my opinion: its like disrespecting the job.

wish you the best in your Biz. my friend.

have a good day

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 8:43 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
I agree, but this is an art if you can work in Iran and you test your ability in difficult places...

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 10:14 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
databack wrote:
I agree, but this is an art if you can work in Iran and you test your ability in difficult places...


IF your PRICES ARE VERY LOW (cheap, sorry to tell), You will never have the chance to RAISE IT BACK.

This all depends in your INVESTMENT on this Biz. and How much you INVEST.

As for ur case here, I will NEVER EVER do it for less than 3000$, even if I HAD TO CLOSE MY BIZ.

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 9th, 2017, 10:48 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
You can buy easily Encase, FTK, X-ways forensics and many of professional tools and can access to many professional resources, go to meetings, classroom and else.
We have embargo from inside and outside... We find answer of questions very hard. No classroom, training...
Please if you want to judge about that cheap price, first think about condition.

Thank you about your help

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: HP MSA P2000 G3 SAN
PostPosted: January 10th, 2017, 4:02 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
databack wrote:
You can buy easily Encase, FTK, X-ways forensics and many of professional tools and can access to many professional resources, go to meetings, classroom and else.
We have embargo from inside and outside... We find answer of questions very hard. No classroom, training...
Please if you want to judge about that cheap price, first think about condition.

Thank you about your help


PM Sent.
and good luck again

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 124 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group