July 28th, 2017, 3:54
July 28th, 2017, 4:05
July 28th, 2017, 4:27
July 28th, 2017, 4:32
fzabkar wrote:http://knowledge.seagate.com/articles/en_US/FAQ/213891en
July 28th, 2017, 18:07
July 29th, 2017, 3:46
Offset(h) 00 04 08 0C
00000000 E71D0000 40000000 40000000 5D860400
00000010 02380000 04381606 06481806 03589C06
CFW CAP RAP SFW
00000020 0B58CC07 0558DD07 0E70FD07 00000008
SHELL SAP IAP
02 CFW (controller firmware)
03 SFW (servo firmware)
04 CAP (Controller Adaptive Parameters)
05 SAP (Servo Adaptive Parameters)
06 RAP (Read/Write Adaptive Parameters)
0B SHELL
0E IAP (Interface Adaptive Parameters)
ID offset name CC4H update component
--------------------------------------------------------------------------------
02 - 0x00038 - CFW - CC49_update_2H_section_6.bin (similar, but not identical)
03 - 0x69C58 - SFW - CC49_update_2H_section_2.bin
0B - 0x7CC58 - SHELL - CC49_update_2H_section_3.bin
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00060A30 FF FF FF FF FF 1F 00 00 43 50 52 53 00 00 00 00 ÿÿÿÿÿ...CPRS....
end of compressed section ^^^^^^^^^^^
00060A40 00 00 00 00 75 94 00 00 FF FF FF FF FF FF FF FF ....u”..ÿÿÿÿÿÿÿÿ
^^^^^ used space checksum
00060A50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
........
00061630 FF FF FF FF C4 F9 00 00 ÿÿÿÿÄù..
whole-space checksum ^^^^^
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00060A30 FF 1F 00 00 43 50 52 53 00 00 00 00 00 00 00 00 ÿ...CPRS........
^^^^^^^^^^^ end of compressed section
00060A40 C4 1B 00 00 75 94 00 00 FF FF FF FF FF FF FF FF Ä...u”..ÿÿÿÿÿÿÿÿ
^^^^^ ^^^^^
current checksum old used space checksum
00060A50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
........
00061630 FF FF FF FF C4 F9 00 00 ÿÿÿÿÄù..
whole-space checksum ^^^^^
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
0005C880 43 50 52 53 B4 41 00 00 34 7B 00 00 CPRS´A..4{..
CPRS ^^^^^^^^^^^ ^^^^^^^^^^^ size = 0x41B4
0005C890 06 00 10 00 80 22 21 20 46 2C 30 40 94 A0 36 31
........
00060A30 FF 1F 00 00 43 50 52 53 ÿ...CPRS
CPRS ^^^^^^^^^^^
July 29th, 2017, 4:28
Amarbir[CDR-Labs] wrote:Hi,
Also With Patient PCB/ROM If i Try And Check Translator In Terminal i Get This Message
Overlay PartNum: 01101642
CFW PartNum: 03071103
Overlay CompileDate: 20130110
CFW CompileDate: 20110307
OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
0001DF50 71 78 37 07 00 00 00 00 00 3F 00 01 05 00 0A 00 qx7......?......
0001DF60 00 00 02 00 0E 60 01 00 07 03 03 11 03 07 11 20
^^^^^^^^^^^
03/07/2011
July 29th, 2017, 14:30
July 30th, 2017, 0:58
fzabkar wrote:AIUI, the ST500DM002 is a 7200.12 model. If the serial number is a match, then I'm suggesting that the client may have applied the official 7200.12 CC49 firmware update.
Here is the configuration matrix:
http://www.users.on.net/~fzabkar/HDD/PH-CC49.TXT
IIUC, after the update is applied, the controller and servo firmware versions become PH0G2D.CCD4.JQ019Y.CC49.D289.
You could extract the PHCC492H.LOD file from the update and compare its ROM segments against your ROM dump (Moltke has written a ZOC script to parse the LOD file and identify its segments). You might also want to check the other LODs in the package, just in case the client selected the wrong file.
July 30th, 2017, 1:25
Parsing segment....... CFW
Warning! Segment whole-space check sum is not zero: 0000nnnn
July 30th, 2017, 3:10
July 30th, 2017, 15:52
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
CFW 1 (PH0G2D)
000077F0 43 50 52 53 54 29 05 00 CPRST)..
different ^^^^^^^^^^^ size in bytes
000077F0 43 50 52 53 58 29 05 00 CPRSX)..
CFW 2 (CCD4)
0005A150 43 50 52 53 88 0F 00 00 CPRSˆ...
same
0005A150 43 50 52 53 88 0F 00 00 CPRSˆ...
CFW 3 (JQ019Y)
0005C1E0 43 50 52 53 54 06 00 00 CPRST...
same
0005C1E0 43 50 52 53 CPRS
0005C1F0 54 06 00 00 T...
CFW 4 (CC49)
0005C840 43 50 52 53 CPRS
0005C850 B4 41 00 00 ´A..
same
0005C850 43 50 52 53 B4 41 00 00 CPRS´A..
July 30th, 2017, 19:58
July 30th, 2017, 20:12
waqas_ali766 wrote:Press Control A in terminal and tell me the Package number, i give you its resources,
You can simply upload the resources, to fix the Overlay Failed error,
Its safe for Data Recovery
July 30th, 2017, 20:27
July 30th, 2017, 20:28
July 30th, 2017, 20:31
waqas_ali766 wrote:you can just tell me the P/N number, i will give you the Drives original resources. the TGT Code, and the Overlay.
If some one change then Press Ctrl + A send me log, i will give you only the overlay file compatible with that ROM.
July 30th, 2017, 20:43
waqas_ali766 wrote:If the Rom is modified there is no problem.
Some times the rom is dead, so a person can transfer its RAP CAP SAP, head adaptives to donor rom, and write to hdd
July 30th, 2017, 20:50
July 30th, 2017, 21:15
Powered by phpBB © phpBB Group.