All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: PCB rom placement 2060-771642-001 Rev P1
PostPosted: December 1st, 2019, 21:46 
Offline

Joined: November 24th, 2019, 20:28
Posts: 7
Location: Japan
Greetings

I am working on a Marshal MAL32000SA-W72 3.5" drive that possibly has PCB issues. I have a donor drive with the same PCB (2060-771642-001 Rev P1) but it is from a WD2002FYPS. I checked online and saw that some PCBs come with a 8 pin ROM, some doesn't and some has the ROM info in the MCU. There is no 8 pin Rom on neither PCBs. Currently the motor does not turn with the donor PCB.

Should I try to find another donor for the PCB? I wont be able to switch the MCU if it is needed but maybe I can use PC3000 to write the patient's ROM on to the donor. Maybe the PCBs are incompatible? There is no difference in the layout or parts.

Any help would be appreciated. Thank you for your time.

PS. I have been doing data recovery in a Japanese company for about half a year. I am still very much a newbie.


Top
 Profile  
 
 Post subject: Re: PCB rom placement 2060-771642-001 Rev P1
PostPosted: December 2nd, 2019, 9:58 
Offline

Joined: March 4th, 2019, 8:33
Posts: 78
Flameborn wrote:
but it is from a WD2002FYPS.

it doesn't matter


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group