Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 29th, 2005, 7:02
A couple of days ago, i changed PCB from a maxtor PATA drive to an SATA drive. The drive started normaly, but not @ full capacity (both drives were 160 gb), the SATA drive with PATA pcb was @ 130 GB, and not working with UDMA. Any ideea what module to modify to get full capacity ?
I think the rom module is, but i do not want kill the drive in the atempt.
Any of you tried this before ?
Thanks in advance.
Powered by phpBB © phpBB Group.